Search results

My B2320 with la304 loader is in another town. I want to store it in a smaller enclosed cargo trailer for winter. The trailer is 12' according to its model but I measure the inside of trailer at just under 13'. Will it fit? Can someone measure their setup? Specs say tractor is 93.9" without 3...

Earlier thread discussed hooking up pto shaft with engine off vs running. How many unhook pto with engine off? I do not shut off the engine. The potential risk (although nearly nonexistent) is the same with the engine running.

2005 L4630 with 650 hrs, gst, front weights, TNT cylinders and r4 tires. Also has another spare set of hydraulics in the back. No fel. Tractor has sat outside and is sun faded but otherwise runs good. I looked at it 1 year ago and he wanted $12500. It has been intermittantly on CL for at least 1...

Here is a chance for someone to get a tractor that can go through the tough stuff. Any takers? It would be interesting to give it a try. 2010 - Kubota M126X MFWD Tracks Tractor - Loader - 125 HP - 64 Hrs.

I recently purchased a vacation/rental home in the Rocky Mountains. I have Verizon cell phone currently and the coverage is better at my primary residence than the other major competitor, ATT. However, in the mountains my Verizon service will not work in the house but works 100 feet away. ATT...

Have been contacted by company wanting to erect about 80, 2 megawatt turbines in our area. Towers would run in 2 lines about 3 miles apart, with about 40 towers each. Many irrigation pivots and the towers would be placed at the corners of the pivots to miss the circling pivots, roughly every 1/4...

Found a 4 in 1 bucket. Modified it to fit to fit a skid steer carrier attachment. Is it too big for my Toolcat?;) http://i345.photobucket.com/albums/p388/radman1photos/4in1bucket.jpg http://i345.photobucket.com/albums/p388/radman1photos/IMG00089-20101229-10241.jpg I believe it weighs nearly...

I had a kubota 3710 GST several years ago. Have gone to HST since then. Considering a Kubota 4630 GST -if I can get the price I want:thumbsup:. My 3710 did not shift well under load to a different gear. It would nearly stop, then shift and jerk forward. The old GST was 8 gears and the newer...

Looking at a used 2005 L4630 with HST and 600 hours. Very good overall condition. Has TNT, R4 tires, and front weights but no loader. Asking $14,500. Seems reasonable but I will buy if only a very good deal. If get it for $12,500 I might bite. This tractor is suppose to have the LA853 loader...

I am in the process of buying a compact loader in another state 1000 miles away from a Case construction dealer. Dealer has several stores in the Maryland area. Have talked to owner and salesman. I want to get a purchase agreement before I wire them the $$. Getting them to answer e-mails or...

Investigating the cost of shipping a compact wheel loader. 13,000 lbs, 19' long by 81" wide. 1,250 miles. Have listed with Uship and on Yesterdays Tractors. Any other suggestions or ideas? Getting bids of around $2100. Fair price? I have never purchased anything like this without seeing it. Has...

I currently have a 2006 Bobcat S300 with a/c, 2 speed, hydraulic bobtach and few other options. Very good condition, runs great, 3000 lb lift, 80 hp, 8500 lbs. I am considering buying a used compact wheel loader (CWL) instead of the SS. Have been looking at Case, CAT and NH. No JCB dealers in...

Does anyone have this kind of lift arm for their JD. Would this be used in place of a quick hitch? Can different balls in the lift arm be used for cat I vs cat 0 or cat II? Would the lift arm instead be used the bushings on implements to make it the same Cat III pin size? Ocassionally I would...

Sorry posted twice. Ignore this thread.

Does a FEL on a CUT lower the COG if FEL is lowered to near the ground with bucket? Is it better to mow hillsides with FEL and bucket on tractor than with FEL off? Could a bucket wider than the tires of a CUT help prevent a roll over if the bucket is near the ground?

I have a an old, 3pt 6' rhino mower on my JD 4520. I would like to use this kind of mower:John Deere HX10 10' pull type mower Will it work? JD 4520 handles 6' with no problems. Mostly cutting mild to moderately heavy grass. I would prefer 3pt, but no way to lift a 10' mower with 4520. I have a...

I have a ruger 9mm and smith armory KD 40 cal semiauto pistols. Thinking about getting a 22 pistol. Mostly for target practice. Needs to be a semiauto. I have looked at ruger and browning target pistols but it doesn't have to be a target pistol. Any suggestions/recommedations would be helpful...

Bought a used 2305 late fall last year from dealer with 330 hours. Decided to change the HST oil since it's age and status was unknown. I am guessing it had never been changed. It is not stated in the manual, but by far the easiest way to get access to the filter and strainer is to jack up the...

Where is the best/easiest/legal place to connect the cable for the battery breakaway on a trailer? The DOT in my area received some federal grant money for a safety program and is cracking down anyone hauling with trucks or trailers. One guy was fined for the plastic coating missing on the cable...

Does anyone use a hydraulic oil heater on their TC? It has been consistently in the single digits for the past week and -10-15F at night. I already use an engine heater on timer.

I am considering replacing my S300 skid steer with compact telehandler such as a Versahandler v417. Drove the v417 2 days ago and pushed a little snow. It was actually nice to drive and turned fairly tightly (5' inside radius). Has lift of 4400 lbs and lift height of 17'. The dealer ,who I have...

Used the 5610 with homemade meyer 84" snow blade on the front and 66" blower on the rear. I usually just use the snow blade, rear blade or sweeper broom but this was a bad storm of 8-9" and 25-30 mph winds for 2 days. Started out with freezing rain then snow. Drifts up to 6' in some areas on...

The farm has been without power for over 12 hours. Been snowing for 2 days and started with ice. Currently 17F and 28 mph winds. Over 2500 residences without electricity. Hooked the generator to the tractor. Will probably run all night supplying power to electric portable heaters. Running the...

Asking opinions about rifles can be worse than asking what kind of tractor to buy but here it goes. More level heads on TBN than anyother forum I have been on. Been hunting with shotguns for many years (35+) and really like my Benelli super black eagle 12 ga semiauto. Also have a Browning...

About 6 months ago I changed the boom and tilt cylinder on my 5610 D series TC. I wanted a little more lift and changed the boom cylinder. Then found out I needed more umph on the tilt cylinder to match. I made the mods over a 2 week period. The TC cylinders are 2.5" bores with 1.5" rod...

I have a nice commercial grade zero turn with 52" deck and 27 hp kawasaki motor. My mother's house which is 90 miles from me. I mow it most of the time with my zero turn and haul it down on a trailer. Often I am going to the farm for other reasons. I can't justify running down there just to mow...

Guy on craigslist has JD 609 on sale for $1200. Says in excellent condition. Price seems good but don't know much about these mowers. Any good or bad points? Seems like they have been around for years but many seem beat up. Will use on a JD 4520. Probably much more mower than tractor.

Discovered Polaris is launching an electric ATV this fall. What is your opionion? Knee jerk reaction to high fuel prices last year? I give it less than 1 year production. 2010 Polaris Ranger Lineup Preview

Not sure where to put this post. Saw a Miller 302 Trailblazer welder with Kohler motor for sale. 266 hours, 1.5-2 years old on a 4x6 steel trailer. The seller is asking $2300. Price seems good but I don't know anything about this welder. I have a Miller 250 mig welder and works fine but I had no...

I am considering trading in my cab 3720 for a cab 4520. 3720 is a 2007 and in great shape, 350 hours, FEL, R4 tires and nearly all available options. I previously used it at my "city" house but recently it went to the farm. The problem is the R4 tires do poorly in the mud and the clearance is...

Does anyone have information on the JD auto hitch? Suppose to make hooking on a pto easier. Anyone use one? Saw one on craigslist with I-match for $350 (looks new). Is it worth it? I don't have any John deere attachments but have JD 3720.

I am considering buying a utility trailer. It has been on the dealers lot for 2-3 years. It is 82"x20' with 15" metal side wall, 12,000 lb rating and mesh rear ramp gate. I like the rear gate for loading smaller stuff such as ZTR. However, I would like to occassionally load my JD 3720 CUT or...

What idiot figured out the way to change HST oil on the TC (5610)? I changed the filters and oil this weekend. The oil is supposed to be siphoned out of the reservior. Siphoning out the oil from the reservior is very slow and doesn't remove a third of the oil from the entire system. I removed...

Tried my 5610 TC with 36" tree spade today. This is the first time I tried it on the TC. I could lift the ball of dirt but the curl cylinder would not hold. As I lifted the spade, the tilt cylinder would extend as I lifted. Never could lift the far end of the spade. I had never seen any...

I have Mobil 1 and Valvoline Premium Blue diesel synthetic oils. Bought the Valvoline when couldn't find Mobil 1. I have about 2 qts of Valvoline left over both are 5W-40 and same rating. Can I mix the two together to get rid of the Valvoline?

Saw ad for used Landpride RCR 1872 rotary mower. 6' mower. Guy used it for 4 hours and purchased fall of 2008 and looks like new. Called him and he will take $1275 for it. Deal or no deal? I have a very old Bush hog that still works. Paid $250 12 years ago for it.

I looking at buying a used utv's. I am looking at 07-08 models. I am starting to see quite few on the market. One deal is a 2009 Polaris ranger Xp bought by wife for a x-mass present and now they want it sold. Most sellers still owe a substantial sum on these units. What is the best way to buy...

Guy has aluminum truck tool box for sale. It is designed to fit on the side rail of the the pickup. My current cross-over tool aluminum tool box is factory painted black. Can I paint the used aluminum to match to match my black toolbox? How do I prep the surface? No spray gun. Would probably use...

We have a 60x100x16 metal pole barn shed and considering adding a lean to on one side. Current shed has 10' apart posts. We have sprayers and grain carts in the shed that take up lots of space and only see seasonal useage. Want to use it for machinery shed with some equipment up to 12' tall and...

Has anyone considered putting a larger boom cylinder on the TC? The current one is 3000 psi, welded, 2.5" bore, 1.5" rod and 22.89" stroke. I am considering putting on a 3000 psi, welded, 3" cylinder with a 1.75" rod and 22.75" stroke. The new cylinder is about .75" longer retracted but I can...

Looking at a bush hog 277 mower on Craigslist. Cant find any info on the net. Seller says cat II but seems kind of odd for a 7' mower. Is it cat I/II? Weight? Any info would be helpful. thanks

I recently purchased a Toolcat 5610 with 3 point a couple of weeks ago. Only have about 30 hours on the Toolcat (TC). Previously owned Kubota 7100 (16hp), Kubota 3710 (37hp) with GST, Case IH DX29 (29hp) HST, and still currently own JD 3720 with cab (44hp) HST. Both Kubotas and JD had FELs with...

Today I officially joined the toolcat club. Picked up my 5610 and used it about 4 hours. Mowed with the 90" finish mower for 2 hours. Glad I listened to everyone and got the 90" instead of the 72". Most of the grass was about 8-10" and worked fantastic. With my previous rear finish mower and...

I bought a carry hauler from TSC and modified it to better fit my CUT and upcoming Toolcat 5610 3pt. The basic carry hauler was purchased at TSC and shown below. Wire mesh bottom. Self dumping. Basic frame is a good design but needed improvements. It is not cat I so my quick hitch would not...

I have a old rear blade and considering the fabrication of a dozer blade on a skidsteer. I have 2, daul action cylinders. Can I put one cylinder on each side to angle the blade? This will help balance the forces on the blade. One will push the same time the other pulls. The flow rates would be...

I washed my 2002 DX29 (same as TC29D) last week and now have a glow plug problem. When the engine is cold, I can't get the glow plug light to come on and engine is harder to start. Once the engine is warm or if it has been running for awhile, I can shut off the tractor, turn the switch on and...

I have a 2000 Case-ih DX29 (deluxe version with HST) with 2 rear remotes. My case ih dealer has 4 different sizes of blue NH loaders with the old numbering system. I can't quite remember the numbers but they were 12?, 14?, 16? etc. What size would fit my tractor? These loaders came from CNH...

Finally got a copy of the official 5610 specs. Similar specs as the 5600 as expected. The 3 pt lift capacity is 1775 lbs 24" behind the lift. It surprisingly got a little heavier with an operating weight of 5640 lbs vs the 5490 lbs.of the 5600 model. 25 pto hp.

What is a donahue 28' trailer worth? Seller wants $2100 which seems a little high. Floor planks are marginal. Most will need replaced. A few are new. Other wise good condition. Tires like new. I have used these before but don't know what they are worth. Implement Carriers - The Donahue...

Getting close to ordering a TC 5610 - 3 pt version. Cab a/c is a must. It will come with hi flow on the 3 pt version. Will also get larger 29" R4 tires, block heater and 68" low profile bucket without teeth. The low profile bucket is heavier duty and few inches longer to allow cutting edge to be...

Here is a sneak preview of the 5610.

Does anyone have any experience with the whisker broom. Can it really brush dirt off of cement? Is it easy on or off? Whisker Push Broom Attachment - Bobcat Company

Seller advertising his 07 ranger xp silver LE with deluxe steel cab, double gun scabbard and cargo bed divider. Also has windshield wiper. 150 miles looks like new according to him. Asking $9000. Price seems good to me but haven't looked at these closely for a while. Also polaris will be...

I bought a 500 gal diesel tank with electric pump. The tank seems to be in good to very good condition. I would estimate it has about 50 gal of non-off raod (no dye) diesel in the tank. The fuel looks good but is about 1.5 years old. Can it still be used? Add some supplement? Just put more fuel...

Got call from my dealer today. They have a 3 pt toolcat in stock. They are a select dealer and got a unit from Bobcat. This is not a prototype but one of the early pilot production units. They can order them but the computer ordering information is not currently in their system. The 3 pt version...

On the cab 3000 and 4000 series, what does the deicer switch do? (Has a snowflake symbol). Is is suppose to be off in the summer and on in the winter? Whenever I have turned it on or off, there doesn't seem to be much difference. Can't find any useful info in the manual.

Does anyone have good uses for a stack mover? These can be found relatively cheap at auctions. $400-500 range. Seem like a good chunk of metal with heavy axle, tilt bed and roller chain. Most are designed to carry 6000# stacks in the field. Make one into a tilt trailer? Give me your ideas...

Was talking with ag dealer recently. He says that NH will be making their future color for tractors red instead of blue. I have noticed that all the newer NH haying equipment including swathers and balers are red. End of the blue? The Case-IH and NH tractors are becoming more and more the same...

I am looking for a batwing rotary mower. 20' width to cover 8 row planter with 30" rows. Anything to be aware of when buying used or new? What kind of tires - air plane, laminated, foam etc. Better brands? I see mostly Rhino in my area. Will use it primarily with 105-125 pto hp tractor. Will...

I recently ordered a Case-IH Maxxum 125 Pro. The engine is a 6.75L (411 cu in.) diesel with electronic high pressure common rail and 4 valves/cylinder. This is a 125 hp tractor. The same sized 6 cylinder motor, high presure common rail injection and 4 valves/cylinder is used in the next size 140...

I am considering getting rid of my open station 1994 JD 5300 for either cab JX95 or JD 5420 or Kubota M9000. I want a little more hp with cab but stay in the larger utility tractor category. All are MFWD. Not familar with JX line. Farmer has 2007 Jx95 for sale with 87 hours. Has 2 of them but...

For you Kubota guys, there may be a new tractor in your future. Was at my dealer the other day and he showed me a flyer for an 85 hp Kubota with rear tracks and MFWD. The rear tracks looked like an oversized mattrack. Large sprocket on the axle with bottom of track about 3-3.5' long. Sort of...

I live at the top of a hill and next spring, the city is going to pave the gravel road in front of my house. They are planning to cut down the hill about 12'. Their orignal plan shows lowering the front of my property, about 400' width, down to near road level. My house sits back from the road...

FYI - hydraulic bob-tach will soon be available on the toolcat. Dealer says he had seen a promotional picture of it. Price? I don't know if it can be retrofitted.

I am trying to figure out a creative way to purchase a 3 pt toolcat for next year, but for business purposes, want to apply it to this year taxes. I have a 40' manlift genie that is in very good condition that I bought on an auction a few years ago for 10K. It would only go one direction when I...

Can anyone tell me the diameter of the 52# starter weight and 110# standard weight that would be used ona JD 3x20 series with R4 tires? I have also noticed pictures people have posted showing a flat sided standard weight but JD parts shows a slightly domed weight with notches on the edge. Which...

Test drove RTV 1100 and 900 yesterday. Both are nice units but probably not what I am looking for. The top end speed was anemic on both and top end power seemed a little weak. The engineering seems light years ahead of other units. The diesel engines are sweet and the transmission is gigantic...

I picked up a new Toolcat brochure. Under features it mentioned several options including cab heat and a/c, radio/cd player, high flow, road and rear work light, back up alarm and horn, rear window gaurd, and attachment control kit. I didn't know your could also get keyless start system...

Hauled my cab 3720 back from the farm during the night. Next morning noticed the front windshield was in a million tiny pieces. Ouch! I had driven down a highway which had been topped with gravel and oil. Suspect either me or oncoming car flipped a rock into windshield. FYI, new windshield is...

I know the tool cat weighs more than most CUT's but is it big enough for some dirt work? Enough lift capacity? Is traction good enough? I have only seen one breifly several months ago until yesterday when I had the chance to examine one more closely. It was a 2006 C series. The tires seemed so...

Going to an auction. Rhino FM 100 rear discharge mower for sale. Used twice. Should be in very good condition. Besides scalping, what is the down side to larger finish mower? I have a 72" side discharge but would like the rear discharge option. I have a JD 3720, so the hp should not be an...

I am considering changing my current hydraulic cylinder on a boom lift to a larger cylinder. My current cylinder is 2" in diameter and I may replace it with a larger cylinder. If my current 2" cylinder can lift 1000#, would a 3" cylinder lift 1500# (50% larger diameter results in 50% more lift)...

Plans are still in the works for the 3pt toolcat. Maybe later this year?

How useful is the hydraulic dump box on a toolcat? Is it used a lot, occassionally or rarely? Is it a must have item or could a manually tilted box or fixed cargo box be OK for a cheaper price? It seems like the bucket can carry a lot and still able to load and unload itself.

I am going to look at a 36" 1996 model caretree spade tomorrow. Owner says in excellent condition and used privately. I believe it is a model 536B. Weighs about 1600 lbs. He used it on a bobcat 873 and I also have an 873. Has truncated spades. Hydraulic stabilizers, spades and swing gate...

I bought a used 100 gallon steel transfer fuel tank. 2 compartments with 50 gal each and came with hand pumps on each side. Both tanks were used for diesel but have dirt/crud/rust in the bottom of each. Not bad but needs to be cleaned better. When I shine a light inside, the sides look very good...

Everyone here always seems to have good advice. I want to get a good notebook computer. I haven't really researched computers for a few years. Who do you recommend? I currently have IBM and Dell desk tops. One is XP and the other Windows 2000. It needs to be Windows based for some of my work...

Can the high flow on a toolcat be activated whenever needed (by me) or does it require the 7 pin attachment hook up on the attachment to activate it. Just planning for the future with possible toolcat purchase. Can other vendors hi flow attachments be used with a toolcat hi flow?

I bought a side discharge rhino 72" mower, used one season and in very good shape for $800. Can a side discharge be converted to a rear discharge? The back trailing edge of the side discharge mower is elevated just like the rear discharge. The only difference I can see is the placement of the...

I am trying to determine the benefit of hydraulic down pressure on a 3 pt. An aquaintance of mine has a prototype machine in development which is currently designed with 3 point down pressure, category I attachments and FEL. I see it as cross between a skid steer, CUT and utility vehicle. I call...

What type of engine water heater should I use? For various reasons, I don't want to use the type of heater that fits directly into a freeze plug or block plug. Does the type that are spliced into radiator hose work better or should I get one that splices into the cab heater return water hose? My...

Our local JD dealer can no longer get parts/equipment from JD beginning today. Dealer has been in area about 5 years. Doors close this week and they sell CUT's, lawnmowers, gators, attachments etc. JD wants them to be part of larger Ag dealer in area but no larger dealer wants to join with them...

Previously had a Kubota 3710 and the loader lift capacity is suppose to be about the same on my JD 3720 with 300cx loader. 300cx loader capacity seemed to be less but no real proof. Checked the hydraulic pressure on the JD 3720 at rear remote. Pressure was 2200 psi and is suppose to be 2500. The...

Does anyone have experience with an ag utility fork and grapple. These are the kind with multiple tines pointing forward on the bottom and a grapple that closes over the top. I have about 150 acres of pasture with lots of cedar trees. I want to use my skid steer with a tree shear to cut them and...

I have a old 78" Meyer snow plow I am attaching to the front of my JD loader with skid steer attachment. I doesn't have any hydraulic cylinders and would like to add. I already have the front hydraulic lines on the loader. It has the bracket for the cylinder on both sides with a 20.5" spacing in...

Dealer got back from Kubota meeting this week. Looked at new brochure for Grand L's. Wasn't able to get a brochure since they are few in number and only for dealers. Actual brochure may change when production starts. Here is some info. Models: lift cap. weight (gst) (hst) (cab) L3240...

Used my 3720 cab heater for first time tonight. Temp was 45 outside and the heat coming out was not very warm. I thought the heater would be too hot at that outside temp. Also had major condensation inside on the glass. Tractor temp gauge was about 1/3 way to redline. Engine too cool? Anyone...

Looking for help from the NH or Case-IH guys. I have a JD 3720 with 300cx loader and skid steer attachment for the loader bucket. However, the recommended JD bucket for the SS system weighs 485 lbs and I believe just too big and heavy for a loader with 1600 lb lift. My other choices is to use a...

I have a 3720 JD and 300cx loader with skid steer carrier attachment but no bucket yet. (Currently using my prior kubota bucket.) The 72" quick tatch standard bucket is recommended but I can't find any dimensions other than weight which is 485 lbs. Dealer hasn't been able to find dimensions...

The electric diverter on my 3720 JD defaults to the rear hydraulic couplers when I start the tractor instead of the loader. Is it possible to have the default to the loader control valve rather than the rear hydraulics? I use the loader more than the rear hydraulics and frequently I move my TNT...

I've noticed some owner's have a bolt on cutting for their FEL bucket. It seems like overkill. I thought they were designed for stopping excessive wear on the cutting edge and could be replaced when worn down. I don't even have one on my Bobcat 873 bucket with 2000 hours. I can't imagine ever...

My dealer is prepping a JD 3720 HST w/ cab for me. When I ordered it, I made him throw in a tool box at the end for N/C. It sits just below the rear loader bracket and in front of the cab. The metal bracket that holds the tool box is well made but the tool box is laughable. It is about 12" long...

Can some one tell me the weight and capacity of the standard 61" bucket for a 300CX loader and for a 72" bucket on the 400CX?

My understanding is the early, nonseries II, had multiple problems in the early production. Does anyone have information on problems with these skid steers? I'm looking at a 1999 model with 900 hours. Used by homeowner on a few acres.

I'm getting a JD 3710 with skid steer attachment on loader. I will get a Jd worksite pro 66" utility bucket. The bucket weighs 479# and has a heaped capacity of 20.5 cu ft. and struck capacity of 15.9 cu ft. Does anyone know the weight and capacity of a standard or heavy duty bucket in a...

Did you try the Kubota in 4WD vs the Agco in 2WD? Might be closer. The Agco has more weight, more hp, R4 tires vs turf tires. No contest. Heck even the pull of the chain is downward on the Agco and up on the Kubota. Was it like the show PINKS? Loose the race, loose your ride!

I'm in the market to upgrade my Kubota CUT. I have actually been a member of tractorbynet for many years but hadn't posted for a while, moved, changed e-mail, and had to start new member name. :) I have known my Bobcat/Kubota dealer for several years and was discussing upgrading. He had...

The JD website list two sizes of R4 tires for the 3XXX series. Other than size and price, what is the difference? 27x8.5-15 6PR front R4Ind. 2 pos 43x16-20 4PR Rear R4 Ind. 2 pos $329.00 25x8.5-14 6PR Front R4 Ind. 2 pos 15_19.5 6PR Rear R4 Ind.2 Pos $192.00

The JD website list two sizes of R4 tires for the 3XXX series. Other than size and price, what is the difference? 27x8.5-15 6PR front R4Ind. 2 pos 43x16-20 4PR Rear R4 Ind. 2 pos $329.00 25x8.5-14 6PR Front R4 Ind. 2 pos 15_19.5 6PR Rear R4 Ind.2 Pos $192.00

I am considering moving up to a hydrostat cab tractor. Does anyone know the amount of drawbar/rear wheel HP loss for a hydrostat compared to gear drive. I have a Kubota 3710 GST and dealer said expect to lose about 20% in pulling power with hydro. He recommended an increase from 37hp to 46hp...

Recent quote for the following: 3520 tractor, deluxe cab, ehydro, mid PTO, R4 tires, rear single SCV and electric diverter kit for 2 more rear outlets, engine heater, rear work light kit, auto cruise control kit, air seat suspension, radio and mount kit, external mirrors, 300CX loader with skid...

Does any one know what year a 3710 Kubota would be with serial number 71015? I believe it maybe a 2001 but not certain. Thanks in advance for the help.

I' ve talked to two different dealers on the JD skid steer attachment for a 300CX loader. One says it is on the put on the loader and taken off to use the standard 61" JD bucket. The other says it is more part of the loader and requires a special skid steer type 66" utility bucket which can...

Talking with Kubota salesman today. He will be attending a meeting in Oct for the new series of compact tractors. I was considering a trade-in on my 3710 Kub for a 4330 with cab but may wait for new line. He is letting his current inventory run down to make room for new line. Anyone hear...

I have 2 tractors. One is a 1994 JD 955 with turf tires, loader, 2 buckets and 60" deck mower with 200 hours. The other is a 2000 DX29 with R4 tires, 2 rear hydraulics and front end weights and 300 hours. Both are in excellent condition. Need to sell one. Not sure which one at this time. Any...