Search results

Purchased 11 months back, as stated the air seat leaks down in about two minutes & ride then becomes unbearable. Apparently during assembly hose barb fitting was over tightened cracking the plastic housing of the control switch. Dealer has supposedly been trying to find a new switch but claims...

As title states, I’d like to add Dynamat style insulation on floor and hopefully in roof of my LS built Boomer 55. There are 4 nuts on on upper roof that appear to secure it to the cab structure; could roof removal be that simple?

Traded my 2012 Kubota L4740 & as you might expect some operator adjusting needed. Major points are the two pedal vs treadle hydrostatic pedal, and seat to steering wheel placement. Feel I can adapt to the two pedal but after about 4 hours with boxblade yesterday I think I prefer the treadle...

South Louisiana flatlander wanting to modify the fuel system so they will draw down equally. Thinking of removing stock setup from tank valves down, saving in case of resale; then mount a filter / water separator setup same as my L4740 so just have to stock one fuel filter. Haven’t looked at...

Sorry for long post, 2013 cabbed 4740, HST+ with 1100+ hrs. Experiencing power loss, engine bogging & slow to recover especially when shredding. I’m over the road O/O, wife mostly cuts pasture & had been complaining about power loss. Approx year back, two things happened when my job was really...

In process of purchasing ZD1211. As an afterthought I inquired about the air seat available on the 15 series, dealer measured, confirmed that it will bolt on, getting price & contacting Kubota as to where to access power. Wondering if any of you guys went the air seat route on your 1211s if so...

2012 GR 2120 48" deck Yesterday afternoon wife began cutting grass for first time this season, noticed that deck not in normal lowered position, barely cutting the top of the grass. Came home last night, checked hydraulic raise / lower deck action appears to be normal, the round numbered deck...

2012 GR 2120 w/48" deck Wife pulled lawn mower out of shed, (first grass cutting since winter) & noticed that the deck is elevated even when using the hydraulic lever to put it in the lowest position. While working the hydraulic lever you can see the deck raise & lower, but at lowest position...

2012 GR 2120 w/48" deck Wife pulled lawn mower out of shed, (first grass cutting since winter) & noticed that the deck is elevated even when using the hydraulic lever to put it in the lowest position. While working the hydraulic lever you can see the deck raise & lower, but at lowest position...

L4740 with fel, presently have the forward cab lights only, would like to disconnect them, and hook up the hood lights instead. Bout the only thing I do in dark is shredding, and the dust on the windshield make the cab lights useless, I actually see better with them off. Think it would be better...

Just curious if anyone has ever built a 3 pt mounted, or pulled weed wiper that works, & doesn't leak, drip, etc. Have about 9 ac of pasture, thick with different weeds but also some grass.

Did a search, couldn't find any posts, wondering if I am the only GR2120 owner with this problem? Did fifty hour service, fairly sure I got all the zerks, even greased the service manuel in the zerk search process. IIRC, creeping began shortly after, greased linkage zerks again at maybe seventy...

After visiting the local Kubota dealer and looking at the air seat on one of the M models, I am seriously considering going with a Grammer. I remember sometime back someone (think it was 4 Shorts) had posted an excellent thread with pics about modifying the seat pan on the L. Doing a search, I...

L4740 Did 50 hour service some time back, looked in the owners/service manual, could not find how to reset the service reminder, and wound up forgetting about it. Now up to 94 hours, climbed in cab and for some reason, that was the first thing I saw when I turned on the key. How DO you reset...

L4740 cab, hydro, R4s, approaching 50 hrs. Had some loads of dirty sand hauled in to make a house pad- this formed a levee, and the recent rains helped turn my backyard into a lake. I decided to move some of the fresh dirt, then cut a temporary drain ditch using the fel and bb. As I was doing...

Did a couple of searches this forum, "matching Kubota orange", and "matching Kubota paint". Lots of stuff popped up, but couldn't find what I needed...... Recently purchased L4740, want to weld hooks on fel and Woods bb (painted orange). I know you guys have found the correct color match in a...

My new L4740 w/cab & loader is setting at the dealers; Came in without the rear remote I ordered, and I am tempted to try to install it myself, if it not to big a job. Would like appreciate any input, advise. (I did just go to Tractor Smart and fill out a form.)

Going to list everything I did, as problem seems to be because of something I did. 2005 TC33DA 620 hrs mostly used with rotary cutter. Key switch replaced, due to it not returning to "on" position after starting tractor. While replacing the switch, I noticed tractor was due a service. After...

Wife has put her foot down; she has to have AC, or no more shredding the pasture. Breaks my heart to trade our TC33DA HST. After a little online looking, I figured the Boomer 3050 with CVT was what I wanted, factoring in the hp draw of AC, and wanting to move to 6' tools, rotary cutter, bb, etc...

Wanting to replace my rusted out 5' shredder, and have been thinking about trying a six footer. For help on the front, the 33 is MFWD and has an almost never removed fel. Hydrostat, with unfilled industrial tires for what it's worth. Narrowed choices to the Woods Brush Bull, the galvanized...

I know the battery replacement thing has been kicked around quite a bit here, and now that I need to replace the battery on my generator, I'm intending to give it a used tractor battery. Haven't decided between the Optima, or the Odyssey dry cell for the tractor replacement, and wondering if...

Have about 10 hours on a Kubota T2380, (new purchase); wondering if anyone has issues with theirs. (23hp Kohler / 48" cut (counter-rotating blades) Streaking of uncut grass-especially during turns. Trouble shooting section of manual lists the following possible causes: (a) ground speed too...

Did a search, guess I'm not using the right "key words", cause I know it's been discussed; trying to find info on working the fel control in a manner that causes the bucket to float. Also wondering if there is an easy way to disable the float mode? I have moved quite a bit of dirt around on my...

Looks like the electric pto on my 1529 Cub Cadet gave up (198 hours on machine). After about thirty minutes of cutting, it will turn off, and usually start working again after a "cool-down". Called dealer yesterday, they can order one for $303.51 + shipping and tax. EGADS!!!!!!!! Sitting down...

Since adding a quick hitch to my TC33DA, my top link now appears to be approx. 4-6 inches too long. I leaned the tower on my Woods shredder toward the rear, and am making out alright with that tool, but my box blade is very limited on any top link adjustment, meaning I shorten the top link till...

TC 33 DA on R-4s, with 14LA fel, I have scattered ruts on my 10 acres, nothing deep, just the kind you don't notice until you have bounced over them when shredding with the cruise on. I'm wondering if I could damage anything in the hydraulic system by going over these bumps with the fel bucket...

Will shortly be looking to replace my R-1 tires on my 1715 FWD, & would like to go the R-4 route. Did a search & didn't come up with any help; my concerns are (1) The width of my wheels, if an R-4 is available in the sizes I need. Front = 7-14; rear = 11.2 - 24. I'm afraid that my present wheels...

After pricing around, I bought a couple of new toys for my 1715 Ford from the local Case IH dealer. A friend accompanied me when I went to p/u the attachments, & he was also impressed with their prices, leaving there considerably lighter in the checkbook. The salesman noticed me looking at their...

Friend who doesn't fool with computers, has a 5210 with VERY slow or not at all responding 3ph. Neither of us very "tractor savvy", so was wondering if we could get any advice on what might be the problem. Power steering, & fel are both OK, which we think would rule out a plugged hyd. filter; &...