Search results

I have a Valby Ch260 hydraulic feed chipper for sale in Woodstock Conn

https://bearingfinder.ntnamericas.com/item/four-bolt-flange-unit-square-style/it-cast-housing-eccentric-locking-collar-uelf-type/uelfu210

MAPP gas burns at a higher temperature compared to propane, providing more heat and making it suitable for tasks requiring intense heat, like welding. Propane, on the other hand, is used in a wider range of applications, from heating to cooking, due to its lower burning temperature.

I anyone is interested I have a very lightly used Farmi L501 10,000 pound log winch for sale. Comes with a self releasing snatch block Located in Woodstock Conn Andy

Valby CH260 Hydraulic Feed Chipper Excellent Condition 6" Round 9 Slab Located in Woodstock Conn Can Load $3800

Willy Thats not my experience. The deck and seat on my X748 which is 14 years old are fine.

I've been using Deere X748 for over 10 years. 60" commercial deck, Yanmar 24 HP Diesel No issues

ANy body have any experience with this company of it's flail mowers? I'm about to buy this 86" mode https://etractorimplements.com/product/emhd-86-heavy-duty-embankment-flail-mower/ Its quite a bit less expensive than others Thanks

Backhoe time

Try here Component Parts & Accessories Archives

If your interested I have a barely used Farm JL501 11,000 pound logging winch for sale in Eastford CT

https://www.siouxsteel.com/explore-our-products/koyker-manufacturing/koyker-loaders

Its said to think you beliee that

Looks like a good deal to me. The rear pto leak should be an easy repair

https://www.amazon.com/s?k=corn+head+grease&i=lawngarden&adgrpid=1335908356577029&hvadid=83494560650115&hvbmt=be&hvdev=c&hvlocphy=100218&hvnetw=o&hvqmt=e&hvtargid=kwd-83495331235991%3Aloc-190&hydadcr=28665_14584306&tag=mh0b-20&ref=pd_sl_1desmli28b_e

https://repairmanualus.com/file/JOHN-DEERE-LT133-LT155-LT166-Repair-Manual.pdf

https://www.palletforks.com/skid-steers/hay-handling/tine-buckets/

lol

https://www.manua.ls/branson/3510/manual

All of our TV have lasted well over 10 years

My Land Pride Box Blade has 2 flaps, one for forward and one for reverse

I'd go for on of these https://www.tractorsupply.com/tsc/catalog/tractor-seats?

Here all items are priced on drive through screens

Not here. Much less

https://www.ebay.com/itm/395259949921?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1-JK5yl_USU2RHOgriSZc3g38&norover=1&mkevt=1&mkrid=711-213727-13078-0&mkcid=2&itemid=395259949921&targetid=4580153138864422&device=c&mktype=&googleloc=&poi=&campaignid=603247546&mkgroupid=1224856947396832&rlsatarget=pla-4...

Several of my tractors had them, I never used them as it was easy to see when bucket was level

Have you tried using a borescope to look in roof panel?

Top, reinforce the top of bucket

Definitely get a workshop manual. Alo be careful of what you use to support bit haves.

I found Progressive to cheapest overall when I bundled. Andy

What size & cost?

Certainly not true

Used black oil better than new??? Not in my machines

I've used uship several times with good results. Look at reviews

https://statesville.com/judge-grants-temporary-restraining-order-against-everything-attachments-bank-says-conover-based-company-owes-nearly/article_639f11cc-d0e0-11ee-bf59-df7d174d3956.html

It may just be me but the backhoe on my MX is my most used attachment Andy

Looking good

I've had a Model 3 Tesla for 4 years. other than 1 set of tires, wiper blades and cabin air filter no other costs. Charge on solar so no fuel costs. I never buy an ICE vehicle again

I'm not concerned driving or parking my Tesla

I design systems for a living. Did it myself. $18,000 in materials. $3000 cash for helpers to install. $12,000 state rebate and 30% federal tax credit

Solar System, all electric house (heat pumps), 20,000 miles a year in Tesla Model 3 electric bill $11.41 month

LOL I have the folding ROPs on my MX. I've folded it once. Takes a Gorilla to fold & unfold

Price seems high to me. I'd offer 1K

Consider adding a backhoe to mix. It will let you dig out the stumps. Pulling out 6 inch stumps is hard even for a machine like my MX5200

Is that a transmission screen? Doesn't look like a fuel filter

The implements may be worth more than $5000

The 1520 is a good tractor. Parts availability may be an issue

https://www.smithsenterprise.com/ls-front-end-loaders-1

I've bought all my tractors from Kahn in North Franklin, Has treated myself and my family fairly since the 50's Andy

All of my tractors have RimGuard. Earlier I had calcium chloride which over time destroyed my rims

I could use that

I believe they own 26% of CNH

As some of you know last year I dropped a tree on my MX5200 and KTC covered the $7000 repair. Well last week I was Bush Hogging and cracked the transmission case on a rock. Dealer says KTAC will cover it. I took another tractor to get it off the rock, Lesson learned. Don't Bush Hog without...

I have a full set of Stihl gas and Milwaukee M12 & M18 garden tools. Haven't used the Stihl tools in several years . Andy

On all my mowers I use my Milwaukee M18 impact, No blocks or chains required. Andy

3 ranges give you more options. M for most work, L for earth engaging and heavy loader work, H for transport Andy

I never sharpen my blades. 20 years on one unsharpened set. New Land Pride 3 years no sharpening. The rocks do the sharpening

Why. Musk’s company has a great safety record

Looks good to me. Great Score!

You don't need cell service to start the car. I've had my Model 3 since 2018 and only replaced the tires at 60,000 miles, one set of wiper blades and a cabin air filter. A couple of warranty repairs were done by mobile service in my driveway. Insurance is less than my Mazda and Zero cost for...

I also have the Milwaukee Both 1/2 & 3/8 Both work great. And love not needing a compressor

I've done that many times to remove topsoil. Works fine

I had ATI on my Ford 2020 and yes it operated easily.. I'm not at the farm right now but I will disassemble clean and grease when I get there. Thanks for all the suggestions. Andy

Hi Scootr Can you post a picture showing the clearance I don't have Thanks Andy

I've bought these https://www.amazon.com/Mover-Parts-Ignition-RC411-53933-RC461-53930/dp/B07QPR7GS2/ref=sr_1_3?crid=1VXD11D3FI4C5&keywords=kubota+key&qid=1686855957&sprefix=kubota+key%2Caps%2C117&sr=8-3 Pretty cheap I's say

Looks great. What type of farm equipment doe you design? Andy

UFB Direct is paying 4.81% No minimum, No fees

I think I found the problem Nothing appears to be bent but the back of the lever is binding on the frame. I think a little grinding will solve it. I'll keep you posted.

If anybody in the Conn area is interested I have an unused 72" Kubota SSQA Have Duty Roundback for sale

A backhoe with a tractor adds almost $10k to the tractor package. Of course a larger tractor would be nice!!

"but will not close when I depress the solenoids manually." Heres the clue. It appears that the solenoid doesn't open even when activated. Like said above switch the hoses. If it then opens replace the solenoid.

You can dig in soft soi with little or no roots. Anything else the backhoe wins hands down. Andy

I would ask these guys https://www.gofordigger.com/

Agreed, Manufactures alco need to retain a warranty reserve on their books to cover warranty costs. Typically about 6% of product cost

I ran the ContiSilents that came on my Tesla Model 3 for over 60,000 miles with no issues. Andy

I was going to say the same thing

Me either Andt

As a design engineer I've never been pushed to design a product fail at a certain point. Always designed the best product we could based on cost to build. Andy

Agreed, it's not very messy

Its unfortunate that that happens to you. All of my dealers, Tesla, Tractor & Honda SXS do excellent work. Andy

If it was me I would contact the safety officer at MF. Explain how the loader failed and could have caused a fatal accident. Safety issues always get results. Being a product engineer is how I know. Any safety issues on products I designed were quickly death with. One time when I worked for...

Good choice. My BH92 is my most used attachment. Andy

I wouud not use metanol. Methanol Methanol is highly flammable and if you decide to use this product it must be mixed with water to make it so you do not blow yourself up while mixing it, installing it, or driving your tractor with it in there. Depending on strength of mixture, methanol and...

Yes all of the modern PTO shafts are the same. Andy

I've been looking for a PTO stump grinder fpr quite a while. Low & behold one popped up on Craigs List about 10 miles from my farm. A 15 year old Shaver SG50 Stump Grinder in get shape. I'll post pictures when I get it. Goes for over $10k new. Got this one for $2500 delivered...

Lol I also have 2 40 foot containers and one 53 foot semi trailer and a 40 foot square garage at my other house. This one is at my farm. Andy

I know where the mower edge is relative to front tire. I rarely ever look back. However I did get rid of a rear mounted snow blower due to neck strain. Andy

Thats great but the cost of some of the diagnostic equipment still puts it out of reach of most people. Andy

Nope. Just shell Andy

I don't mind sharing costs. It was a Kloter Farms prefab. $158,000 all in www.kloterfarms.com

Looks interesting. I went to the website and didn't see a cost. How did you buy yours and what was the cost? Thanks

Starting to fill up

When I bought my BH92 on my MX I paid no assembly labor Andy

900 RPM is too low to operate at. I run my Kubota between 1500 & 1800 unless I'm using the PTO

It was a package deal. I'll find out the concrete guy for you. I think he was from Bristol.

Sounds to me like a fuel issue. Probably runs on what is in carburetor and the carb doesn't refill fast enough.

Typically you can do somwhat better the more you buy at once Andy

My Tesla Model 3 came with ContiSilent tires with the foam. Lasted over 60,000 miles with no issues. Had to gove dealer the special instructions on how to patch Andy

I have a 60" Exmark Razer. No issues Andy

My LA11065 SSQA has one lever/pin which I can't release by hand. It takes a 2 foot pipe or a hammer on the pin. Any thoughts on how to correct this? Thanks Andy

My MX5200 had this problem. 2 small pieces of linkage needed to be replaced. Andy

Not sure. The walls were factory built panels. Could they possibly be brace walls?

I agree. Pushed the budget for this one. 4 weeks start to finish. Still waiting on windows. Going to finish upstairs for the grandkids Andy

After many years of storing outside finally a 26x40 garage High ceiling. No posts

It looks like they do https://shop.kubotausa.com/oemparts/cl/kub/60a311a187a866105438d58d/l48-3-point-linkage-drawbar-hitch-parts

What's happening. Do you hear the fuel solenoid click? Andy

Why no add a lock to one you can find?

I.be has a X748 diesel for 12 years. Its been flawless Andy

I'd contact this company https://www.wheeltractor.com/info/aboutus.html

Explain, what was your experience?

https://www.tractorsupply.com/tsc/product/chapin-pro-series-turf-spreader-8401c-8401c

I'd rent the trencher to dig the trench. And a tractor or skidsteer to backfill Andy

The 2 major tractors in my area have full lots. They both tell me sales are good Andy

Wrong Looking at the most recent monthly inflation numbers, more than a dozen OECD members had a higher inflation rate than the United States’ 8.6%. These were predominantly Baltic and Eastern European nations, which have been hit especially hard by the consequences of Putin’s invasion of...

The Honda Pioneer seat heat issue is well know. I have a 2022 Pioneer 1000-5 that does not have that issue. Honda made some changes in 2022 models. Andy

I use a 72" LandPride bushhog on a MX5200. The only way I taking down a 3" pine is by knocking it over with the bucket first. I wouldn't even try what you are attempting. Sounds like a sure way to damage your machine Andy

I could use one of them Andy

The picture from the front is a much smaller log than the stump

Picture 3 is a different log. Probably half as heavy as the stump Andy

Loaded with RimGuard plus the backhoe. No issue with back lifting. Just ran out of lift capacity. Got stump in first picture about 2 inches off the ground. Andy

Nothing online that I could find

It’s all she’s got. Over 2000 pounds MX5200 landPride Grapple

Looks great. Enjoy Andy

I haven't had any issues

I have a Honda Pioneer 10000-5. It has 2WD, 4WD, Differential Lock and Turf mode. On my 80 acre farm I run virtually all the time in turf mode (2WD) up and down pretty steep hills, through streams and on the road. Top speed 65 mph. Andy

I dropped a tree on my MX5200. Dealer picked up and returned looking like new. About $7,000 damage. Cost me $250. Wouldn't be without it Andy

I agree with this. I no longer have my TN75D but I did remove the boot. Just kept turnign adn wigling until it came off. A little glue helped upon replacement Andy

I have a LandPride 6 foot on my MX5200 and it works fine. Andy

Look here: https://www.tractorhouse.com/listing/for-sale/215168195/2013-john-deere-553-loaders-other-equipment

48" 3000 -4000 pound capacity. I have Land Prode on my MX5200

I agree. 6 of the 7 tractors I have owned came from the same dealership. Have had zero issue with parts or service. Andy

This runs at 12 V 17A according to the data sheet. Thats 204 Amp Hours per hour. Four of these 250 AMP HOUR batteries using 80% DOD (Depth of Discharge) would run it for about 4 hours, One would last an hour. https://www.amazon.com/1000Ah-Deep-Cycle-Battery-Solar/dp/B07NPQ5TWQ

Like others said Kuhn is a great brand. If the tines are good I'd buy it Andy

I agree with that. My Honda Pioneer goes many places where my Kubota MX5200 or Ford F150 couldn't The Honda also goes 65 mph Andy

These are pretty effective...

I have a Honda Pioneer 1000-5 Side by Side and also an F150. The Side by Side is great for running around our farm in many place the F150 couldn't go. It runs over small trees and shrubs with ease. It's also much more fun to ride in. Andy

I had a Kuhn tiller. It was excellent Andy

I've had a Ford 1710 & 2120. Both great tractors, However parts availability now is a serious issue Andy

No loader, $1500 https://www.shoppok.com/eastky/a,50,95477,1972-Simplicity-4040-Garden-Tractor----1500--Owingsville-.htm

Ad said it ran 3 year ago. Wouldn't start now. Turns over freely. From pictures looks like a 12 v conversion. Can't wait to get my hands on it. Funny thing tractor cost & shipping almost equal Andy

I'm not doing that!!!!!!!

Still in Tenn, I'm in Conn. Arranged transport for $1300. Had one as a boy. Made money plowing snow when I was 12

No problem with my Kubota BH92 picking up logs or rocks. Have you tried a different setting? Andy

Does anyone know what happened to SoundGuy? He used to post daily, Haven heard from him in years

I used one of these on my Ford 1710. Worked fine https://www.ati-corporation.com/loader-attachments/quick-attach-adapters.php Better link Tach-All Quick Attach, Loader Attachments, ATI Corporation

200 Gallons per Minute, I assume you mean per hour

I've had a 1710 & a 2120. The 2120 is quite a bit larger, Andy

I agree that $35k would be a reasonable offer. For a machine that clean $38 is not out of the question. Andy

Conn taxes them (if they know you have them) at the local level. none of my tractors have ever been taxed except sales tax when I bought them. My 44,000 excavator was taxed because the assessor saw it. It got taxed in one of 2 towns depending on whare it was parked on my farm on Oct 1. The 2...

Looks great. I'd like to try one on my farm

https://www.amazon.com/SAMSUNG-SmartTag-Bluetooth-Tracker-Locator/dp/B08SXLWXH9/ref=asc_df_B08SXLWXH9/?tag=hyprod-20&linkCode=df0&hvadid=509217868721&hvpos=&hvnetw=g&hvrand=8115214226094179877&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003352&hvtargid=pla-1211067896359&psc=1

Great find. I think you did well with your purchase. Andy

Looking good. I really like those floor anchors. I'm doing a garage this spring and will be adding some Andy

I have a booklet of payment coupons I've never used. I also get an email each month telling me that a payment is due even though I have it set up on autopay. Only statement I receive is once a year telling me I paid no interest Andy

I agree

I agree. I like the online version, Always up to date

I dropped a tree on my MX5200. KTAC covered it all. Zero issues Andy

I've has zero problems with Kubota Credit. My payments are automatically taken from my checking account every month. Andy

I only want the best to protect my eyes.

Depends on what your chipping. Feed slow and you'll be ok

Ouch Nice repair. Looks new

I have a Deere X748SE 24 HO Yanmar Engine, True Cat 1 3PT I have a 5 foot york type rake, a 54 inch from mount blower adn 60" mid mount deck 12 years old and still going strong

I get an email from Kubota Credit about 2 weeks before the payment is due. I have my checking account set up to automatically pay each month. Andy

I agree with the LED idea!!! Andy

I have several friends with Mahindras. Machines are good. Parts availability was a problem Andy

Looks newish to me Enoy Andy

I think $500 is a good compromise Andy

The only gasser Id bt is an antique one Andy

Some lawn tractors have 3 pt hitches. My Deere X748 ha a Cat 1 hiitch Andy

I have had a 96 inch Land Pride 35 series for over 2 years. Still going strong. Originally behind Ford 2120 (43 hp) Now Kubota MX5200.. I think you should go with a 6 inch Andy

I'm not sure what you mean by wind/solar energy doesn't transport well. It is no different that electricity produced by any other source. The reason solar fields are distributed is to produce power where it is needed and increase grid stability and reliability. BTW I am an engineer for the...

Wind & Solar coupled with energy storage is a very reliable source of energy

60 Mile per Hour wind and heavy rain. No snow Andy

Based on TractorHouse $3500 to $4500 would be approiate Andy

On a tractor that size Id go with a 8 foot box blade. You'll find the 6 footer way too small. I have a 25 year old LandPride that ha served me well Andy

I'd say about $800

12/26/2022 9:01 AM

Creating a sandstorm

Wide Spread Outages

I agree. If not causing a problem leave it alone Andy

I'm another who wouldn't have a tractor without. My last 6 tractors have all had backhoes. My current Kubota MX5200 has a BH92. I use it all time for everything the OP mentioned. I even use it with the mechanical thumb to hold logs to cut into firewood lenght. Andy

Is it like this?

f you cant get part for the Famteac I'd trade it.

According to KTAC website you can by a policy for a paid off tractor

Love it. Fully Automated!!!

My treadle pedal and starting interlock have been fine for several years. All of a sudden it won't start unless I position the pedal by hand so the tractor goes slowly in reverse. The pedal also is much harder to move and won' t return to neutral. Does anyone know where the switch is and how...

All of my tractors have come with a full tank, loaded tires, free delivery and service manuals

Very interesting Looks good

I just use a paper towel which I carry in my pocket Don't see the need for any chemicals

I don't remember what I paid over 10 years ago but I know it wasn't that much

I have this LandPride version and use it occasionally with a 8 foot york rake. Typically push the rake https://landpride.com/products/884/SH35-Series-Skid-Steer-Hitch

Same as others occasionally with battery operated right angle grinder Andy

My 60" Exmark ZT will mow at 9 mph. Get one with a suspension seat

I once ran a hedge trimmer into a hornets nest in some shrubs. You can imagine how annoyed they were. About 20 stings. Each one felt like a sledge hammer blow

Looks like a good reason to leave it on

I agree with this. Every tractor I've had has had a backhoe.. I probably use it more than any other attachment. Cost of ownership Priceless !!

Looks like a great deal to me with all the attachments!

Wish I did too. Only bought 380 shares