Search results

I would say your steering cylinder piled up. Mine got replaced under warranty because the seals went bad at 60hrs. apparently its very common. i would take the cylinder off and take it to a good hydraulic repair shop they can repair or build a new one for a lot less than a new one from Mahindra...

Did that on my 3016. exact same engine. if i remember right you loosen the clamps on the rubber boot on the front axle then slide it back. should expose the u joints. There is a snap ring or C clip that you remove which then lets you slide the shaft off the stub. but from the online parts it...

I'm going to guess it could have been a poor Dealer PDI. Even if the owner was not new to the tractor world. I mean who would think to check every nut and bolt on a fairly new or hardly used tractor? Yes it says in most manuals under the maintenance section at so many hours to check this and...

sent you a PM

So looking at your first pic you posted, i think the Power Beyond port is to the bottom of BYD in that pic. the port is kinda off the side of the valve. looks similar to my 3016 that i had. follow that hose. it should go back to the rear somewhere for the 3 point lift. the pictures that lagolan...

Take off the existing power beyond hose and hook it to your "OUT" Port on the 3rd function valve. new hose from the loader Power Beyond port to the "In" Port of the 3rd function valve. the rest should be fairly simple. the Original power beyond on the loader valve sends fluid to the rear 3 point...

LOL OK, I have some experience in this department! i built my own true 3rd function for my 2638 CAB and i replaced the entire grip handle with a 4 button control grip. it was a bit of a chore! that plastic panel is not the easiest IMO... You have to remove the somewhat useless plastic Philips...

sure np

what model?

yes it is nice. I did have some minor issues with the cruise control magnet when I first got it home.... there's a nut that holds the magnet in a cup and it came loose from the vibrations and it came out far enough to get jammed under the forward pedal when i was reversing with my mower, scarred...

totally agree. I financed my 2638 and i got all the options. 2 rear remotes,trailer socket kit(may never use lol) MID PTO KIT (probably never use either.......) Cruise control kit. added Rim Guard in rear tires as well. About all you can get i think. best to get at purchase time rather than hem...

Oh yes they are optional on the 2638/2645

I can send you my drop box link for the 3016/3616 service manuals... i would come off of the loader power beyond to new valve "IN" port then on the "OUT" port hook it back to where the original line went that way it shouldn't interfere with the backhoe... somewhere on my posts on my 2638 on here...

I had that happen to my 3016, I got mine to move with pliers and I sprayed it a few times, I also put a spring on it to keep it disengaged cuz it seems they always get stuck in the engaged position. I also learned that when I helped my uncle split his 3215 Gear that the diff lock was seized as...

I bought a 78" HLA 1000 Snowplow for my 3016 Shuttle Shift in JAN 2019. Never really used it on the 3016. I ended up trading up to a 2638HST Cab in Sept 19. Used it Last winter some(no a lot of snowfall last winter here...) works good. did some mods to it. rubber deflector on top and I built my...

No Prob. check your PM

Exactly as Eric referenced. Most are open center systems. I can't exactly remember what type or thread the OEM fittings are, but there not standard like JIC or ORB or NPT. I had a hydraulic supplier identify the correct ones for me(Gregg distributors up here for me.) I had to try a few places...

read my post here, New 2638 HST. about post #18 i have some pics regarding the 3rd function i installed.

yeah those stabilizers on the 15,16,1500,1600 are all the same and seem to be all to sloppy. everyone seems to be breaking them for various reasons.... im sure anything other than that type is better lol. my 2638 has a turnbuckle style and so far been good but i haven't used it much at all.... :(

i have a pdf copy if you still need it. and the service manual as well!

I know my dealer had some issues with the cruise control magnet not holding. they had to put in a shim on the mounting bracket to get it to sit perfectly parallel with the HST Forward pedal arm. one issue i had when i first brought it home was the nut that holds the magnet in the cup came loose...

Glad to hear you hopefully found the issue. Now hopefully you can get parts quick........... that's a bigger issue these days :( keep us informed.

looking at the service manual, I'd say there 3 possible things that might be the problem. 1- the PTO clutch inside could be the issue. most PTO systems uses some sort of clutch pack. I think yours is considered LIVE PTO. you have no wires to activate the clutch. 2- the PTO on/off lever(the the...

I had a 3016 Shuttle Shift(2014) but it had a electric solenoid button and a mechanical lever to engage the PTO. not sure how the HST on yours works, my 2638 HST is setup sorta like my old 3016. i do have the service manual for the 3016-3616 in PDF if you want it :)

I have a 2019 Mahindra 2638 HST CAB. I got the mid PTO as an option. will i ever use it? probably not... but i financed the tractor so i got all the options! can get a front mount snow blower. not sure what else, plus i'm sure there's other custom ideas floating around out there..... lol

I have a 2019 2638hst cab and can confirm the the suction side of the pump has a suction strainer on the right side and the spin on filter is on the left side. i went from the loader PB port to my new 12vdc solenoid valve (D03) in port then the out port hooked up to the rear factory spool valves...

Hello all. I have a chance of getting some older 3 point implements from my Fiancé's deceased parents. just a couple questions tho. 6' finish mower, Douglas brand, PTO tractor side may or may not be around the acreage.... no idea where in Canada I can buy blades. no idea how good the gear box...

Update: got my awesome dealer where i bought my 2638 HST Cab from to do some digging and got confirmation today. the new bearing holder housing does indeed have a lip or landing(call it whichever) for the outer bearing race to seat against. kind of what we thought and as the page from the...

Re: 3215 Gear Differential Housing(update) So our parts arrived for my uncles 3215 a few weeks ago. finally swapped the parts from old housing to new one inc new pinion and ring gear. but as we were assembling the bearing holder that attaches to the front of the axle housing we noticed that...

here is what it looks like on my uncle's 3215 gear. emery cloth the shaft and hole. applied o-ring grease and anti seize on the shaft. moves freely!(was completely seized up). the spring inside is meant to keep it disengaged unless you keep your foot on the pedal. keep your foot on it as long as...

Thanks! Here are the last pics with my new Pats Easy Change and a handle in the cab for easy exit imo. should have bought Pats years ago...:mur:

one more pic...

OK, here is some good pictures. I hope it helps everyone. took me awhile to get everything sorted but in the end it wasn't all that bad. I mean the right hand inside panels had to come off with the washer tank too to get the control grip wires routed properly but i'm happy! :)

those are 42". I kept all the attachments i had for my 3016. They are BE brand i believe. and i took two pics this morning. i didn't measure or take pics before, sorry. but u simply cut and weld lol. the brake arms have to come off. need to remove bottom dash panel, snap ring, then u need to...

Ok, so now that i have had a bit of time. i have done Three things in the cab to accomadate my 6'2 and size 13 feet...... drilled new holes in seat mounting bracket's 1.25" further back. that's that max you can go! i also shortened up my brake pedals as my foot was catching on them when i wanted...

Not sure where to start but here goes.... lol i finally felt sorry and decided that i better help my uncle with his 2007 Mahindra 3215 gear tractor. he has had a few mechanical issues with it. Most likely from operator abuse IMO! Hours on his 3215 are unknown.. he bought it brand new in sept...

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019. So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good! I kept all my attachments & implements ill update my info asap. Haven't gotten to enjoy it much...

Just thought i would throw out to you guys here in Canada what us Canadians are paying roughly... I'm Upgrading From my 2014 Mahindra 3016 Shuttle w/425 Hours with Loader, 1 set Rear Remotes,MID-PTO R4 Tires To a New Mahindra 2638 HST CAB Loader w/ 2 Sets Rear Remotes,MID PTO, Trailer Socket...

here is some pictures of my new stabilizer links i built, they work great, have my 5' landpride mower hooked up atm. i drilled the 2 holes on the square tubing slighty different so u get a little bit of wiggle room for hooking up implements kinda similar to the origional ones......

I think maybe thinking of going with TYM as my next tractor! i have a Mahindra 3016 Shuttle ROPS atm. see what i can get on trade or sell privately up here near Dawson Creek,BC. looking at a T394 Hydro or a t454 hydro. thinking the t454 is the better way to go. more pto HP. altho the dealer ill...

Here is what i Did to keep diff lock from staying engaged....

Sure no problem. Ill try to remember to take a picture after work tommorow. Its not the prettiest but prob better than origional. In the mean time ill attach a pic of what actually shifts the diff lock. 3016 shuttle but prob similar on the max28...

Anyone had similar problem like my 3016 where the diff lock lever just flops around? It seems like it's permanently engaged and no amount of turning or holding lever up or alternatively braking left and right disengages it. Makes no noise. My dealer is many hrs away. My choice on that Part. Any...

what size of valve(gpm) would i need to add 1 set of rear remotes to my 3016? im looking at a BM20 from princess auto think i can get a float spool for it too. Thanks Shawn