Search results

Results 1 to 11 of 11
  1. Leylands

    Solar Tractor Battery Maintainer?

    I don’t think you would have anything to loose, the battery isolation is a good idea too! Im actually looking at a similar set up for my tractor/shed until I can get power in a few years, only I’m thinking a little larger scale... a couple of 100 watt solar panels, a few deep cycle or even...
  2. Leylands

    MF30 Industrial - MF34 Loader

    Loaded our new tractor up and headed home. Turns out the tires were partly loaded, plus chains, and cab, it was heavier than expected. We took it slow and I know my truck and trailer is well maintained so wasn’t too concerned but will need a heavier trailer next time. With a little research I...
  3. Leylands

    MF30 Industrial - MF34 Loader

    Hello TBN MF! I recently purchased an older MF30 industrial tractor that had been sitting for a few years and was in need of some attention. Overall the tractor looked to be in pretty good condition, and doesn't appear to have been badly abused over the years. The previous owner was a really...
  4. Leylands

    Massey GC & Kubota BX Front Quick Hitch Compatable?

    this thread caught my eye today. I have a 2014 Kubota bx with quick attach front blower. While at the Massey dealer this morning picking up parts for my MF30, I noticed a Massey GC1700 with front mount blower, it caught my eye as the blower looked 100% exactly the same as my Kubota, only red...
  5. Leylands

    MF30 power beyond return line help?

    My old MF30 tractor has 3 independent hydraulic systems. 1 is for power steering, it’s own pump which runs off the fan belt, and controls one cylinder for steering assist. 2. The transmission/rear end internal hydraulic pump located under the seat. This is 6gpm, and powers my 3 point hitch...
  6. Leylands

    Help to identify this valve?

    I decided to pick up the valve with an agreement I can return it if isn’t what I need. I cleaned it up and found stamping: Walvoil SD5/2-P I did a quick search and it sounds like the Hydro Control company pictured above by ptsg has merged with Walvoil👍 Thanks! I’m considering this valve to...
  7. Leylands

    MF30 power beyond return line help?

    Thanks for the comments and support everyone, great feedback on my hydraulics. I don’t think I was clear on what I need help with. Can anyone confirm “where the factory backhoe units return to tank hydraulic hose connects to on an MF30 loader/reservoir?” I think it gets plumbed to the rear...
  8. Leylands

    MF30 power beyond return line help?

    I completely agree and understand what you are saying, hydraulics/valves can be used to control many different cylinders. I plan to run a hydraulic top link on 3 point, and have one or two spare remotes for a snowblower chute rotation, and possibly also a chute deflector in future. I plan to...
  9. Leylands

    MF30 power beyond return line help?

    Massey Ferguson MF30, no backhoe (has loader, PTO and 3 point). I’m looking to tap into my loaders power beyond port, to run 2 or possibly 3 rear remotes, using the power beyond port which the manual identifies as for backhoe hydraulics. However I am unclear on where my return line from new...
  10. Leylands

    Help to identify this valve?

Top