Search results

Results 1 to 19 of 19
  1. X

    4WD Detent Ball

    I found the detent ball that holds the 4WD selector in place stuck to the magnet on the transmission drain plug. Anyone know whats involved in putting it back in and why it keeps coming out? Tractor is a Mahindra 2565 Cab tractor built by TYM. It looks close to a T554 but with a little more HP.
  2. X

    4WD Detent Ball

    I found the detent ball that holds the 4WD selector in place stuck to the magnet on the transmission drain plug. Anyone know whats involved in putting it back in and why it keeps coming out? Tractor is a 2565.
  3. X

    Add Rear Three Point Control Lever and Toolboxes

    Hard to believe Mahindra 2565 tractors have no toolboxes. I added two and a rear mounted lever to control the three-point hitch.
  4. X

    Mahindra Universal Tractor Fluid Equivalent

    I want to change the transmission hydraulic fluid in my shuttle shift 2565. The owner's manual calls for "MAHINDRA UNIVERSAL TRACTOR FLUID". There are no other specifications listed. What does Tractor Supply have that is equivalent to this. Looking at their website I see ISO 32, 46, and 68.
  5. X

    TYM Mahindra Equivalent and AC Help

    I recently bought a Mahindra 2565. I have been told it is made by TYM. Would anyone know which TYM tractor is equivalent if there is one? Also, would anyone happen to know the refrigerant capacity? I blew a hose this morning. The hose will be replaced/repaired. The AC guy said he will pull a...
  6. X

    Refrigerant Capacity on Cab Tractor

    Anyone know what the refrigerant capacity is on a 2565? Mine blew a line this morning.
  7. X

    2565 Rear Wheel Track Width

    Anybody know what track widths can be obtained by mixing and matching the two-piece rims on the back of a 2565? The owner's manual is useless.
  8. X

    2565 Opinions Needed

    I'm going to look at a 2018 2565 with less than 500 hrs on it. Anything I should look for or be aware of?
  9. X

    John Deere 27D

    Does the cylinder that swings the hoe left and right on a 27D have a grease fitting on both ends? The cylinder extends way back inside the machine and I can not see a way to get to the back end of it. The exposed end has one. The owners manual makes no mention on one at this location.
  10. X

    Considering pruchasing a IHI 35J. Cold start problem?

    IHI 35J needs a shot of either each morning to start. Starts fine the rest of the day. Runs like a sewing machine.
  11. X

    4000 Hydraulic Pump

    Is it necessary to remove the hydraulic lift cover on top of the axle housing in order to remove the gear type hydraulic pump? Any tips or tricks for removing and replacing the gear type pump on the 4000?
  12. X

    Do You Know About the Bucket Zapper?

    This is for sale near me.
  13. X

    FEL Tree Trimmer

    I am interested in building a tree trimmer like the one in the video. I would probably use a single 24" blade similar to the video or maybe two or three smaller blades mounted vertical. The company appears to be out of business. Any ideas on what the specifications on the hydraulic motor...
  14. X

    Decode My Tractor

    After spending many hours on the net trying to figure out how to decode my Ford 4610 I believe it was assembled December 07 1983. According to the second pic the serial number may indicate its an "84" (why two different serial num in each model year). Is any of this correct? What else can be...
  15. X

    Found a Side Mount Bush Hog Today

    Don't think I'll buy it but it's very interesting anyway.
  16. X


    I took my FEL off for the first time this weekend. Two days later I find it sitting flat on the floor. Any Idea how one man can ge it back "on it's feet"?
  17. X

    Middlebuster\Subsoiler Build

    I want to build a combination middlebuster and subsoiler. I have looked at many on this forum and found lots of good info. I have ordered the furrower from Agri Supply (see link). What I need to know and have not been able to find is the the size of the material to make the shank from. My...
  18. X

    FEL Mounted Bush Hog

    A few years ago someone here replaced the bucked on his front end loader with a bush hog. This was on a tractor. It was similar to the ones for a skid steer. I would like to know how it worked out as I am considering doing the same thing. If I remember correctly it was 3RRL but I could be...
  19. X

    Adding Box Blade Rippers

    I havent posted here very much but usually check the forum daily. All I can say is this is a great forum with lots of talent and a wealth of great ideas. Very interesting! I want to add rippers to my box blade. I have ordered the ones from ASC # 49684 Box Shank. I need to know how far below...