Search results

Results 1 to 200 of 557
  1. nisaacs

    2025 Ram trucks

    When I ordered it, the standard GVW was 10,190, options was 10K. They must have had a mid year change, mine is 11040, 3070 payload, so tare is 7970. Went on a good round trip run Thursday, 398 miles, display said 20.2, math was 19.7. I am fine with that. The transmission takes forever to warm...
  2. nisaacs

    2025 Ram trucks

    So, anyone else feel dangerous and buy a first year truck? I did, love the 8spd. '25, 2500 Bighorn, white, 4x4 short bed. Installed, Westin steps, Mopar HD mud flaps, air bags and power hop damper kit. Drove it 600 empty miles for rear axle break in, dumped the oem 75/85 gear oil and filled it...
  3. nisaacs

    Finding rims for a trailer

    Yes, I am not sure what exactly the OP needs. The wheel in his link is stud centric, so maybe the hub centric wheel in my link is wrong.
  4. nisaacs

    Finding rims for a trailer

    A little cheaper but still spendy. Dexstar - 14.5 Trailer Wheel | 14.5" x 6" PLATE Style - 8 on 6.5
  5. nisaacs

    Griffin Dump Trailer Issues Never Again

    It is not Lippert or Dexter parts that fail or don't fail. It is the trailer manufacturer that is in control of the suspension specs. Economy trailers might spec this type, first picture. In my opinion,10k or less. For 12k-16k the second style is preferred.
  6. nisaacs

    Trailer Tires

    I disagree. Nothing wrong with quality bias ply tires. They have been around since day one. This set has a date code of '98, still good. Second set are new bias replacements. I changed them due to age, not tread wear. I have bias on my tractors and loaders. Third pictures is a 1980 trailer I...
  7. nisaacs

    Vintage 900 series Allis Chalmers garden tractors

    Started working on the first (919) of three Allis Chalmers garden tractors this week in earnest. I started dabbling with it shortly after I got it home but it kept defeating me. Intermittent or no spark. Starting to dislike Kohler, two cylinder, 19 HP. After buying two sets of cheap Amazon, made...
  8. nisaacs

    2025 Ram trucks

    He has the 52+22 gallon tanks. He delivers Gatormade trailers, so he is empty about 1/2 the time. Kinda like RV transporters. On 11/06/21 his '18 Ram 4500 had this: "Truck is at 398,065 miles and 6,953 drive hours."
  9. nisaacs

    2025 Ram trucks

    Hot shot trucker I know. '22 Ram 5500.
  10. nisaacs

    2025 Ram trucks

    There are 3 variants of the trans for pickups/CC (Hemi/Diesel) Ram 2500/3500 Pickup Transmission: ZF TorqueFlite HD 8AP1075 — Automatic Eight-Speed Availability: 6.7-liter I-6 Cummins turbo diesel Description: Adaptive electronic control, automatic or Electronic Range Select (ERS) manual...
  11. nisaacs

    2025 Ram trucks

    Off idle torque/clutch engagement torque, one and the same. B6.7 is 400, 6.4 Hemi has a maximum torque of 429... https://www.cummins.com/engines/b67-2021#tab-navigation
  12. nisaacs

    2025 Ram trucks

    Yes, they will also get a slightly different 8spd gear ratios. https://www.cummins.com/engines/cummins-67l-turbo-diesel-2025?v=10046&application=Chassis%20Cab
  13. nisaacs

    2025 Ram trucks

    Just the transmission but you can buy one from Mopar for $40:eek::LOL: 2084000210, Dipstick Installer - Mopar Essential Tools and Service Equipment
  14. nisaacs

    2025 Ram trucks

    Anyone following the new '25 Rams? I like what I see. Some changes noted. 2025 Ram Cummins 6.7: The High Output engine is discontinued CGI block is discontinued and replaced with cast iron (NVH improvements) 3.42 gears only 430 HP and 1,075 ft lbs New version of the CP4 HPFP New turbo Cylinder...
  15. nisaacs

    Need a little help with my PJ Dump Trailer.

    Trailer manufacturers typically close for the holidays, usually two weeks.
  16. nisaacs

    Adding Winch to Gooseneck Flatbed

    Just get a piece of 2" receiver tube and make your own. Sounds like you are more than capable.
  17. nisaacs

    Aluminum vs Steel truck bodies

    I guess I hit a nerve... The thread is about rust. I posted facts and proof that I don't need aluminum or rust proofing. Why should I pay extra for something I don't need? This trailer is a 1980 or 44 years old. Other than some surface rust from sun burnt paint, it is a solid as the day it was...
  18. nisaacs

    Aluminum vs Steel truck bodies

    I disagree. It is not about "back then", it is where you live. Try the desert southwest, they live forever. 1974 F-350, 1991 Dodge D-250 and 2001 Dodge 2500, still on the road. Does this 1975 F-250 sled puller look and sound like junk?
  19. nisaacs

    Deck over bumper pull, 25', 16k

    Finished, I changed out two short pieces with some salvage deck boards from the other trailer. Note the tools required for that little job, :) Took it for a test pull with a small load of hay, pulls good. If I had a bigger truck, I would keep it. For you guys that want to tow 9-10k lbs with a...
  20. nisaacs

    Do used truck prices jump in mid December?

    Some big discounts this month if Ram is of any interest for you. https://www.hornechryslerjeepdodge.com/search/new-chrysler-dodge-jeep-ram-wagoneer-globe-az/?cy=85501&mk=51&tp=new
  21. nisaacs

    Deck over bumper pull, 25', 16k

    About half done. Did I say these tires were easy to hand mount? What was I smoking, lol. I keep forgetting, that was then... I was a little nervous about the date code since this is not a popular size, but 1024 is good. Seem to be a fine, heavy duty tire. Made in Thailand, the Goodyears were...
  22. nisaacs

    Minimum truck for 9,000 gross towing

    Some info here, on a similar question. Does anybody tow a 10,000lb trailer with a F150?
  23. nisaacs

    Deck over bumper pull, 25', 16k

    Started working on the big trailer. Moved the spare tire mount to a better, more user friendly location. Installed the ball coupler and checked the break away battery. It is huge, never seen one that big, garden tractor size. It is old and dead, so I need a new one. It can run a small winch. I...
  24. nisaacs

    Trailer brake is stuck

    If you do some digging, they can be had for about $350. 10k drum: 10K GD Trailer Axle Drum - 8 lug | Trailer Parts Outlet 10k brake assembly: Right Hand 10k General Duty Axle Brake Assembly | Trailer Part
  25. nisaacs

    Trailer brake is stuck

    Okay, that makes more sense. I didn't see where you purchased more than the drum. Were you doing normal maintenance and found the bad brake, or did something acting up, point you to that brake? Good catch.
  26. nisaacs

    Trailer brake is stuck

    You might check with the following next time. Quite a bit cheaper. DEXTER 12-1/4" x 5" Brake Drum Only, 8-7.50 #009-028-01 Dexter 9-28-1 Brake Drum for 12.25 Inch x 5 Inch Dexter 12K-15K Axles https://www.etrailer.com/Accessories-and-Parts/Dexter/DX34XR.html
  27. nisaacs

    Trailer brake is stuck

    There is a good possibility you have a wheel bearing sized. If in fact, you do have a brake locked up, you might be able to unbolt the backing plate and pull the whole works off.
  28. nisaacs

    Towing laws and enforcement in the southeast

    In Arizona, anytime you go over 10,000 on the trailer, that registration gets paid on the truck. Registration to go over 10,000 on the trailer is registered as 10,001. An over the highway truck is registered at 80,000, the trailer is 10,001. If I want to gross 26k on my pickup. I have to...
  29. nisaacs

    Deck over bumper pull, 25', 16k

    Why what? My post has several subjects. Here you go, I just picked this trailer up. Very similar to the one I just rebuilt and sold. Too big for my use, so I will do a minor tune up and resell it. Should fit the bill in your "Torsion suspension" thread. About half the money of the Diamond C you...
  30. nisaacs

    Deck over bumper pull, 25', 16k

    Not finished with my refurbish but we are using it as is. It is going to make a fine trailer. The rust and rot, is from the inside out, from poor housekeeping.
  31. nisaacs

    where to connect to trailer

    Yes, if you look close, you will see a chain front and rear pulling both directions. Then the strap is doing the same thing.
  32. nisaacs

    where to connect to trailer

    Agreed, if it has tires you have tie downs, if the trailer has tie locations. Some trailers suck.
  33. nisaacs

    where to connect to trailer

    I think he is talking about this: I would think a straight one would be fine. Forged Twisted Clevis, Powder Coated, Black, 3/4" - Parts & Repair | Koch Industries | CAL Ranch..
  34. nisaacs

    Military H-1 Hummvee

    See, you ask a dumb question, get dumb answers and get pissy. Carry on.
  35. nisaacs

    Military H-1 Hummvee

    Why??
  36. nisaacs

    Deck over bumper pull, 25', 16k

    Trailer is done, ready to deliver to new owner. I spaced the first deck board with clearance for tie downs and added 3 D-rings over the fenders. (4) oem D-rings per side, just don't get it.
  37. nisaacs

    Deck over bumper pull, 25', 16k

    Trailer is turning out pretty nice. Looking at some deck sealer for it, can't decide on clear or tint.
  38. nisaacs

    Helper springs/ Airbags Etc.

    Looks good. At first glance my load would seem heavier than yours. However, they are probably very close in weight. The drive/trailer axles are backwards on the scale ticket. There are 2 more garden tractors in the stock trailer, 2 trailer spares and 3 empty oil barrels.
  39. nisaacs

    Deck over bumper pull, 25', 16k

    Loaded up and heading North today. About 10k on my little 10k truck:) The barrels are full of used oil for my brothers waste oil furnace. Bringing 2 265/70x17 Cooper ST Max castoff pulling tires I have, they will fit the trailer and even the truck in a pinch. My W/D hitch is 2" so I ordered in a...
  40. nisaacs

    Deck over bumper pull, 25', 16k

    Ended up with both trailers and 3 garden tractors, so I am garden tractor poor now:) 916, 17 and 19, all the 900 series. I will go get them this week. Taking this hitch with me, not a fan of the pintle hitch for a pickup.
  41. nisaacs

    Torsion suspensions

    For some reason I can't find anything, over a 7k on their site but I know D/C uses up to at least, 10k torsion. https://www.lippert.com/lci70-tb-94-80-od-zero-lpib-l-86517-v000228472-v000758421-bundle
  42. nisaacs

    Torsion suspensions

    Diamond C uses Lippert axles, as high as 16k each. FMAX216 - Diamond C Trailers
  43. nisaacs

    Vintage 900 series Allis Chalmers garden tractors

    Thought I would share an online action in Montana, yes, I live in Arizona:) It will be a fun trip with my oldest son, plus, my brother lives near the auction site. This was a large collection of old Allis Chalmers tractors and garden tractors. I knew the guy, back in the day, when I worked for...
  44. nisaacs

    Gooseneck Coupler

    Understood. I would guess it is normal right hand thread. Turn left hard, then whack the base down with a good sized hammer, then crank it some more it might come out. If that don't work, turn it right hard and whack it:)
  45. nisaacs

    Gooseneck Coupler

    I would unscrew that one so you can see what the mechanism consists of. I didn't have any luck finding just the inner in that style, just the pin type. Does it freeze where you live? It appears to have filled with water and froze, maybe cover the top of the hitch/handle with a coffee can or...
  46. nisaacs

    3pt Wood Chipper Recommendation

    I have a 7" from Nova Tractor. It has twin hydraulic infeed motors. I tried two different single powered rollers and it was just too much work for our gnarly limbs. I like it. https://nova-tractor.com/products/bx72rsh-heavy-duty-professional-wood-chipper
  47. nisaacs

    Deck over bumper pull, 25', 16k

    Montana online auction I am bidding on. Flat bed and stock trailer. No listing on the flatbed manufacturer. Stock trailer is a '84 Qubit Ramrod, never heard of them and can't find out anything. Seems crazy, but it is near my brothers home town and we are not getting any younger. I kinda want...
  48. nisaacs

    Allis Chalmers CA

    I grew up with a CA, the only tractor we had on our small farm. Probably too far but here is a massive vintage AC collection at auction, also about 20 garden tractors. Note the price on the 220 4x4:eek: Musser Bros Inc
  49. nisaacs

    Helper springs/ Airbags Etc.

    Looks good. Keep in mind, the corn is placed different on the truck v/s a bumper hitch. The corn appears to be centered over the axle, so it is not unloading the front axle. Without a W/D hitch, a bumper hitch, will always, unload the front axle, adding to the squat. The dump trailer is maxed...
  50. nisaacs

    Helper springs/ Airbags Etc.

    I run 10# in the left side and 5# on the right and never adjust. The air pressure will self adjust as you add weight. I have manual fill, plumbed separate. It will firm the empty ride some.
  51. nisaacs

    Helper springs/ Airbags Etc.

    Do you have a front level kit on your truck? I have a '21 Ram 2500 with 5k Airlift bags, they work good, no squat. My truck has the factory front to back rake but still needed the bags for heavy haul.
  52. nisaacs

    Hay Making on a Different Scale

    Local farmer hired me to deliver 12 bales to a customer, 3x3x8, alfalfa/grass. She didn't have a way to unload so I used the dump. I stopped at the gravel pit and weighed, 23580 gross, 15260 tare, 8320 net, so 693 per bale. Then I picked up 6 ton of rock for myself. I kinda messed up the dump...
  53. nisaacs

    Does anybody tow a 10,000lb trailer with a F150?

    This is what 10k looks like, my '91 D-250 is barely big enough. However, back in the day when I was young and dumb:) my '70 F100 4x2 towed trailers like this...
  54. nisaacs

    16K trailer

    Here is a sample. https://fayettetrailersales.com/view-detail-page/1288261/Diamond-C-FMAX-208-WITH-MAX-RAMPS-25 View Detail Page - Fayette Trailer Sales View Detail Page - Fayette Trailer Sales
  55. nisaacs

    Torsion suspensions

    I know the trailer you are looking at has Lippert axles. But, this is what Dexter says about torsion axles. They appear to over build to allow for uneven ground, on the bigger axles especially or spec 3 or more axles. They don't recommend light duty torsion axles configured in more than single...
  56. nisaacs

    I found a legit 19.5” traction tire 450/550 4500/5500

    Ya gotta hock your grand kids to buy those:D These are affordable: https://www.prioritytire.com/by-brand/founders-tires/founders-m-t?var-founders=31711
  57. nisaacs

    Hay Making on a Different Scale

    I agree, been following quietly, I like hay. I was born and raised on a ranch/farm and when I retired, I bought, hauled and sold hay. Stopped it during covid. Just use it for personal use now. I am considering hay delivery for a local farmer, 3x3x8. It is what I buy now, small bales are too much...
  58. nisaacs

    Old trucks can still tow! My numbers

    '02 is not old, '74 was a good year...
  59. nisaacs

    mobile home axle update kits?

    Without knowing the axle capacity you need, you might consider complete axles, for not much more in cost. https://trailerpartsunlimited.com/axles/6-000-lbs-axles/6k-tpu-electric-brake-cambered-axle-6x5-5-fast-lube-grease/ TrailStar 16" White Spoke Wheel and Radial Tire ST23580R16E with a...
  60. nisaacs

    truck rear suspension - air bags & Jounce springs

    Why do you have to jack knife your maneuver with such a big bite? Can you take smaller bytes?
  61. nisaacs

    Anyone know where to get this brush guard?

    These are more on the economy side... Deer Guards & Brackets for International Trucks - Mytee Products
  62. nisaacs

    Anyone know where to get this brush guard?

    Try Raneys Truck parts. https://www.raneystruckparts.com/international-grille-guards/ Or this outfit. International Semi-Truck Grille Guard - Ex-Guard Or here. Big Rig Chrome Shop | Your Truck Parts Home for Collision and Chrome Durable Front End Guards for Trucks - Big Rig Chrome Shop
  63. nisaacs

    Reinforcing trailer I beam frame

    How did weight in the pickup bed cause the trailer frame to bend?
  64. nisaacs

    Torsion suspensions

    Are you going to pull it with your dump truck or just your 5500? They can both carry some serious pin weight. I don't think the DEC with the 8"x15# I-beam frame will stand a heavy pin weight. Most manufactures use 10"-12" I-beam frame in about 16#-19# per ft. Not sure why DC's bumper pull is so...
  65. nisaacs

    Torsion suspensions

    My PJ 22k dump handles the rough country fine. Just an FYI, Dexter warranty on spring axles is 5 years, or 10 years on torsion. They do need to be level. All spring and torsion axles suspensions are not created equal. It is how the manufactures mount them that is important. Spring suspension has...
  66. nisaacs

    Ram vs Dodge/Chrysler - how complete is the separation?

    Agreed, We bought a '85.5 Escort wagon, junk. We were 33 years before we tried Ford again.
  67. nisaacs

    Pump upgrade for dump trailer

    Maybe check with KTI? https://ktihydraulicsinc.com/wp-content/uploads/2017/10/DBL-1024x560.png https://ktihydraulicsinc.com/wp-content/uploads/2024/04/KTI-Catalog-April-2024-1.pdf
  68. nisaacs

    Pump upgrade for dump trailer

    Power down will overcome a too small valve but still might restrict it some. Any restriction below pump flow will slow it down. Do you know who the manufacture is for your pump? Can you read the tag for specs, like flow? Most are KTI but not all. They are all slow, aggravating. I am very happy...
  69. nisaacs

    Pump upgrade for dump trailer

    The resistance from the lift cylinder creates the pressure. The smaller the orifice the less fluid can pass through, which can cause excess pressure due to volume control. There is a fine line between too small and too big. Too small can cause a bottle neck in the pump flow specs and too big can...
  70. nisaacs

    Pump upgrade for dump trailer

    I went ahead and modified my load control valve for more flow. Oem is 2 GPM. When I added the higher volume pump I left the valve alone. I was feeling dangerous, so I dilled it out. I went 2/64's more, from 1/16 or maybe metric, not sure. Empty, it is at least twice as fast, this is gravity...
  71. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Just to compare, my 16k Lamar dump uses a heavier I-beam/flange and add a 3/4" plate at the spring hangers.
  72. nisaacs

    Pump upgrade for dump trailer

    I don't think the pumps have any more pressure, just more volume/flow. I think the standard is 3200 psi up and 1500 psi down. When the bed is down and the cylinders are horizontal, is where they all struggle. My PJ has the lift system about 2' ahead of center, it will lift pretty much anything...
  73. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Since we are on the subject. This guy is having a bad day. He made the mistake of posting on a trailer forum I frequent and brought out all the weight police:D He might over load and might not, maybe he hauls off highway like I do. Whatever the case is, it should not have happened. That frame...
  74. nisaacs

    Dump Trucking & Dump Trailering

    I agree, 40' of dump trailer/truck don't fit in a lot of instances, yet since I take the job, I have to make it fit. Hard on trucks and trailers. I would love to have a 6 wheel dump truck but don't want the regulations that go with it. I can't even haul with a 1 ton SRW. I haul under Arizona's...
  75. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Another D/C trailer failure. They need to rethink their step decks. You can get a lot of pin weight on them, unlike a gooseneck.
  76. nisaacs

    Dump Trucking & Dump Trailering

    Delivered 3 loads but 7 dump cycles today:( He needs about 2 or 3 more but I ran out of stock. I will haul from the pit Monday.
  77. nisaacs

    Dump Trucking & Dump Trailering

    Yes, about 6.6 yards. With my non CDL registration I can only haul 6 ton or 4 yards of rock, so I don't. Not enough volume for most customers. If they insist, then I will, but I make it plain what I can haul. I do move a lot of cinders, 6 ton is 6 yds for the fine stuff, 3/4" minus, the 2"...
  78. nisaacs

    New tires and long arm tarp kit for my dump.

    Yes, I just store the handle in the tool box for emergency use. Removing one drive bolt on the motor side will release it so I can crank from the other side.
  79. nisaacs

    New tires and long arm tarp kit for my dump.

    Hauled a load of chips this week, just barely fit, 16yds with 2x6x16 side boards. I did have my second truck just in case. Cost me $100 for my helper's standby/no haul:D Replaced the side boards with 2x12x16, 18 yd capacity now.
  80. nisaacs

    Which 2024 diesel 10k gvwr truck?

    Nice rigs. I assume a 2500? Coil or air suspension? Like you, I am rarely empty. My last empty trip, 189 miles one way, slower back roads, only 20 miles of freeway, 23.9 on the display, slight tail wind. My trip over was 22.2, slight head wind. It is about .8 generous v/s doing the math. This...
  81. nisaacs

    Which 2024 diesel 10k gvwr truck?

    This is for the anti diesel guys who love their gassers. Love the frame twisting torque of the diesel in this video.
  82. nisaacs

    Which 2024 diesel 10k gvwr truck?

    Watch this video, he is a farmer like you, so he has gotta be right:D He seems pretty sharp.
  83. nisaacs

    Which 2024 diesel 10k gvwr truck?

    Pretty sure it will be a variant of this transmission. https://paccarpowertrain.com/wp-content/uploads/2022/03/2024-TX-8-Brochure-Final-Digital-HiRes.pdf
  84. nisaacs

    Which 2024 diesel 10k gvwr truck?

    No one tows on the bumper anymore. That is just a term used to show non gooseneck/fifth wheel.
  85. nisaacs

    Which 2024 diesel 10k gvwr truck?

    This is tough making a recommendation without showing opinion, you will get 3 answers:) I will start, I am a Ram/Cummins fan. The 2500 will have the lowest power output, if that matters. However, it will have the best exhaust brake. The 2500 uses coil springs on the rear or air suspension. I...
  86. nisaacs

    Single axle, dually equipment trailer

    You probably need to go look at. Looks like an ID tag on it but it might be hard to read. It is for sure heavy duty but no suspension. Might be hard on a pickup truck to pull.
  87. nisaacs

    Ram vs Dodge/Chrysler - how complete is the separation?

    When members come to the big rig forum (trailers & transportation) and try to justify their 1/2 ton gassers, sorry, I just gotta:)
  88. nisaacs

    Trailer hubs shedding grease caps

    They can vary by brand/application/capacity.
  89. nisaacs

    Ram vs Dodge/Chrysler - how complete is the separation?

    I want one:) Updated Ram Heavy Duty Coming Later This Year https://paccarpowertrain.com/wp-content/uploads/2022/03/2024-TX-8-Brochure-Final-Digital-HiRes.pdf What is there not to like about Ram?
  90. nisaacs

    Trailer hubs shedding grease caps

    At least some of us are trying to find a solution to the problem. All I see, is, you write a book and still don't say anything to help.
  91. nisaacs

    Trailer hubs shedding grease caps

    I don't care for center caps because you can't monitor the hub temps but maybe use them to hold the grease cap on. Measure the void and fill it with something. Southwest Wheel Two Pack of 5 Lug Closed Push Through Center Caps 3.19" Outside Diameter for Trailer Wheels - X2319 | Southwest Wheel®
  92. nisaacs

    Trailer hubs shedding grease caps

    Maybe drill an 1/8" hole in the edge of the hub and hub cap and secure with a roll pin or sheet metal screw.
  93. nisaacs

    Equalizer sitting crooked

    Make sure the springs are all the same length, eye to eye, and the spring hangers in the same location, side to side and front to back. Check leaf count on all springs.
  94. nisaacs

    Equalizer sitting crooked

    We really need some pictures. I assume they are 1.75" wide, double eye springs? Can you change equalizer profile or shackle links for different lengths. examples
  95. nisaacs

    Trailer hubs shedding grease caps

    Yes, a mystery for sure since they are that style.
  96. nisaacs

    Trailer hubs shedding grease caps

    He used a mallet to seat the caps. Op, I had this issue on a trailer several years ago, they were the all metal caps, no rubber plug, so no vent. I ended up drilling a 1/16 hole for a vent and no more issues. I suspect they sealed too tight and the heat/pressure buildup, pushed them off.
  97. nisaacs

    Share Pics of People Hauling or Towing Something Wrong

    How did this happen...
  98. nisaacs

    Trailer recommendation for a New Holland Workmaster 75

    I like the flat hooks for the most part. I wrap the strap around the hook so it can't come loose, it also provides a more blunt edge v/s the stake pocket when you wrap the hook from the bottom. If you hook at the top and wrap, the strap contacts the sharp edge of the stake pocket. I also carry...
  99. nisaacs

    Trailer recommendation for a New Holland Workmaster 75

    Why? My D/C is 28' de-rated to 16k from 18k. With my 10k rated 2500 plus 16k trailer I am at 26k.
  100. nisaacs

    Trailer recommendation for a New Holland Workmaster 75

    I like my Max ramps, however the rear can drag at times. We have a lot of dry washes around here that are road crossings.
  101. nisaacs

    Anyone own an Iron Bull trailer?

    No disrespect, but 6-7k will not buy much in the 17-20k range.
  102. nisaacs

    Anyone own an Iron Bull trailer?

    Maybe consider a full length, deck over tilt bed. Not promoting, just samples in your area, one 16k and one 20k. View Detail Page - Fayette Trailer Sales View Detail Page - Fayette Trailer Sales
  103. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    The old trailer was 102"x25' light weight 12" I-beam frame, 14lbs per foot I think, no sway control. 8k Spring axles. The new trailer is 102"x28' light weight 14", engineered beam, with sway control. 8k Torsion axles.
  104. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    Lol, leave it to you to notice. My brothers, he is blind Ford loyal. Just bought a F-150EV:eek::unsure: for their 45th anniversary. I sold him my old trailer and the grader.
  105. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    What I found with my narrow trailer, is, with a wide top heavy load, it was a little rocky. With a heavy, narrow, wheeled vehicle it was fine even tho the grader is a lot heavier than the load of hay. My wide frame trailer does have the sway control pipe so that may make a difference, so not...
  106. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    Correct, and why I am not interested in their 10-12k singles on the deck overs. I assume they do that so they can be shipped with either style. The FMAX 207-208 have the wide frame. I am not a fan of singles on a 12k axle. The tires are maxed out. 10k axles are fine. Like Hay Dude, I am a fan...
  107. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    Wide frame with singles, note, two deck boards, outboard the frame. Narrow frame with duals, 4 deck boards outboard the frame.
  108. nisaacs

    Trailer: dually to heavy singles, on 10k/12k axles...stability etc?

    I would not convert to singles on a narrow frame trailer that has dually axles. You will loose axle/tire width. Some small manufactures used the same narrow frame for both singles and dually axles. I assume for ease of the build. I had one (16k) 102"x25' and didn't like it. With a narrow load it...
  109. nisaacs

    Need a new(er) truck.... Maybe?

    Wait for this possibility:) ZF Powerline for 2025 RAM HD Diesel
  110. nisaacs

    Flatproofing loader tires?

    TyrFil™ Flatproofing – Carlisle TyrFil™ Anyone ever use this stuff? How do you replace the tires when it is time? I can see some pro's and con's. My biggest con, is it adds weight. I bought a compact wheel loader and my requirement was 11-11.5k operating weight, to keep it legal when I haul it...
  111. nisaacs

    Need help to ID trailer wheel...

    https://www.etrailer.com/Trailer-Tires-and-Wheels/Dexstar/AM20395.html Be advised, some of the older RV axles of that era used left hand bolt thread on the left side.
  112. nisaacs

    Maybe a new truck Ford or Dodge?

    More like 960k, 2500-3500, years '13-'23. Didn't say anything about 4500-5500's. However, it appears Nissan, Paccar and Daimler might be included. This: The formal settlement, which will need court approval, will be made public as early as next month. Afraid the bomb shell is going to get...
  113. nisaacs

    What did you buy this week?

    Picked up a pressure washer at TSC, it was on sale, made in USA.
  114. nisaacs

    Woodland Mills Wood Chipper

    Epic contributor???
  115. nisaacs

    Nova BX72R 540/1000 PTO chipper review

    We had a nice winter day, 56 degrees, so we trimmed the fruit trees, overdue. Chipper, sure does make a small pile out of a large mess. My new little Mighty Mouse, Milwaukee M12, 6" chain saw is awesome for trimming limbs, especially at the chipper.
  116. nisaacs

    Rail roads and their tracks.

    This is a cool little guy. The owner is building a mini Disney Land western theme park. He has a mile of rail for it, 24 gauge I think he said. It will be for tourists to ride and also to harvest his grapes and Lavender. There will be wine and Lavander made goodies for sale.
  117. nisaacs

    Rail roads and their tracks.

    We have a local short line railroad here that is still in operation, started in 1917 I think. You can't tell by the picture but there is some high ground they are climbing is why the switchbacks. The Apache Railway. I can't remember, maybe I already posted this, :D...
  118. nisaacs

    Truck winches

    Looks to me like you will loose a lot of airflow, especially after you add a winch. Is that a concern at all?
  119. nisaacs

    Anyone own an Iron Bull trailer?

    Agreed, I use the sliders for my flatbed with channel rail.
  120. nisaacs

    Truck winches

    I used a standard 2" ball mount, the trailer has a receiver, as do all my pickups. Kinda small but about all I want to carry around. It is just a little better than nothing:D
  121. nisaacs

    Maybe a new truck Ford or Dodge?

    They are kinda cool. My youngest has the Rubicon diesel and my middle son has the Mojave gas.
  122. nisaacs

    Anyone own an Iron Bull trailer?

    Not a very good picture but my Load Max has the full length rub rail, stake pockets and pipe spools, front and back. I notice some stake pockets aren't full size, 2x4 won't fit. These stake pocket winches are kinda cool.
  123. nisaacs

    Truck winches

    I am seeing a lot of Warrior winches as oem, from trailer manufactures. They are also built for the military. They offer free shipping. T1000 Severe Duty Winches
  124. nisaacs

    Anyone own an Iron Bull trailer?

    Gray Touch Up Paint
  125. nisaacs

    Truck winches

    Duty cycle and power needed, what are your needs. Maybe a 10k winch w/double line. Half the cost and battery needed.
  126. nisaacs

    Truck winches

    I think it would depend on what your use is, a lot of use or mostly emergency type stuff. I have/had winches on all my flat bed trailers, Mile Marker, Smittybuilt, Traveler and a small portable Warn. All economy units, I find I rarely use them, so they work for me. With the quality/price of...
  127. nisaacs

    Truck winches

    Factory price is $947, they look good.
  128. nisaacs

    Maybe a new truck Ford or Dodge?

    Pretty sure you wouldn't mind a 400/1000 Cummins in your 5500 if it were available. My '21 2500 has 370/850, I for sure wouldn't waste it if I had more...
  129. nisaacs

    Maybe a new truck Ford or Dodge?

    Old news. Dodge/Ram has had oem exhaust brakes since '07 with GM and Ford about 10 years later. Prior to that you could add them yourself. I installed my first one in '90. A true Jake brake is a engine compression brake, pickups use exhaust brakes.
  130. nisaacs

    Maybe a new truck Ford or Dodge?

    This guy does hotshot, for years, with Rams. 3500-4500 and 5500. 440k plus on his '18 4500 when he traded for his '22 5500, he has 172k on it already. He has very little problems and nothing major. Oh, BTW, I recommend Ram:)
  131. nisaacs

    Who hauls their tractor in a bumper pull dump trailer?

    Thats a good size. Depending on your tractors lift and reach, you might consider 3' sides. With light weight material they are a plus. Be advised, the PJ Ohio factory can not or will not prime the trailer. Only Texas will. At least this was the case in '20 when I bought mine.
  132. nisaacs

    Who hauls their tractor in a bumper pull dump trailer?

    I used to, but moved into goosenecks now. A dump trailer is the most versatile of all trailers. I recommend everyone has one:D The Bobcat loader is 9k.
  133. nisaacs

    Trailer question - skid steer

    Do you find it difficult to see the tips of your forks at all? I bought a set (42") for my compact tractor, similar is size to yours but find I can't see squat until I get about 2' off the ground. I find myself not using them and always go get my Bobcat if I need forks.
  134. nisaacs

    Replacement Trailer Type & Sizing

    What I have found over the years with different trucks and trailers, is, the balls location. If it is too far forward, the harmonic frequency seems to rear its ugly head. I can't really explain it. It seems to only happen under light throttle, pulling. Hard pulling, coasting and easy cruise, all...
  135. nisaacs

    Replacement Trailer Type & Sizing

    Yes, every truck and trailer combo can be different. What exactly are the specs on the truck and the trailer? Where is the ball mounted in the bed of the truck, the exact placement in relation to the rear axle?
  136. nisaacs

    JD 4320 loader upgrade

    I also modified my quick release loader mount. The locks are worn and it will come apart at the worst possible time. I replaced one of the mounts but that didn't help. I think the mast is worn the most and don't want to buy one of those expensive suckers. So, I bolted them together with a 7/8...
  137. nisaacs

    Bobcat Loader upgrade.

    Mostly manure, chips and cinders. It is a light materials bucket so I can't be digging up stumps or any heavy duty work. When I need to push out a tree I use the corner. If I know I am going to do some heavy work I use my JD tractor bucket. It is a heavy duty CNH 5/8 yd. I rent it out so I...
  138. nisaacs

    Bobcat Loader upgrade.

    My oem 5/8 yd bucket was too small for the light weight material I generally deal with. So, I bought a Kubota 1 yd bucket. Sure do like it.
  139. nisaacs

    JD 4320 loader upgrade

    Switched out my JD quick attach to skid steer. That way, I can use all attachments for either loader or tractor. Also, didn't like the small flimsy oem bucket, so I bought a CNH Dirt & Foundry bucket, 5/8 yd.
  140. nisaacs

    Plan Has Come Together To keep Me Busy In Retirement.

    Nice rig! How well does the exhaust brake work? I noticed your brake gain appears to be set at 10? Is that what is available or your setting? I normally run 4 empty and 6 loaded on my dump trailers and '21 Ram. I don't think you need 470hp, how about loaning me some:D MY SO Ram is 370/850:(...
  141. nisaacs

    Base for Sawmill

    This guy used 4" square tubing, about 3/16's wall, I think. He said he went a little too tall with it, it is hard to reach the crank on the carriage.
  142. nisaacs

    Base for Sawmill

    Thanks, I did look at that and if we flip it, it will go a little bit wider but still not enough for a large log. Then the wider the setting the more it interferes with the saw carriage. It won't clear until you get down to about a 14" cant. We moved the front one to get past it, then...
  143. nisaacs

    Base for Sawmill

    Could I get an update on this mill? Maybe some pointers? I just helped my neighbor fire up his new HM122. The log clamps wont fit a large log (20") won't go wide enough. Then they are pointed and make a hole in the wood when you do get the log small enough to fit. Even when you get the log...
  144. nisaacs

    Gooseneck dump suspension mod

    Parts are installed on the trailer. Should be an easy repair in the future. Parts are easy to come by and very reasonable.
  145. nisaacs

    Gooseneck dump suspension mod

    I have all my parts to make permanent, my hoke slipper spring conversion, to roller. Smooth bore, heavy tubing (no welded seam) for the rollers, standard 9/16's spring eye bolts and 9/16's x 3/4" trailer suspension bushings. They are only 1.750 long and I need 2" so I had to cut some, to make...
  146. nisaacs

    Front axle seal leak JD 4700

    Did you ever find your breather? I have a 4320 with the same part number per the online parts book but I don't see it on the axle at all. I found this on "Green Tractor Talk forum, he says they don't have a vent. Front spindle seals on 1025R leaking. Vent needed?
  147. nisaacs

    JD 4320 spindle failure

    Finished up the left side. Two bearings, three gears and both seals. I will leave it set overnight so the RTV will cure, then fill it with oil, then let it set a while longer. If no leaks, I will tighten the tie rods and install the tires. I still need to check the axle vent. Edit: The parts...
  148. nisaacs

    John Deere 5205 MWFD Seal Leaking

    Axle housing vent plugged up?
  149. nisaacs

    Gooseneck dump suspension mod

    So, I tackled my slippers on my dump, like I said, they are getting thin. Not a fan of this old school system at all. You would think they could upgrade to something better. For a home owner, they work fine, but for commercial duty, not so good. So, I made some home grown bushings to take the...
  150. nisaacs

    JD 4320 spindle failure

    One side down, one to go, it will be easier. It has been a struggle, with parts availability, me ordering wrong or flat forgetting:( Typical Spicer, three sets of shim kits for three different locations, for bearing/gear adjustment, $400:eek: Only good news, is, it should be enough shims to...
  151. nisaacs

    Gooseneck dump suspension mod

    Dinged my tailgate with my gooseneck dump, twice....grrr... I think I have fixed the clearance issue. Drilled my hitch at 1-3/8" between the existing adjustments. I didn't want to move it 2.750" the oem holes in the hitch" So, after this adjustment my trailer is high in the front, hate that...
  152. nisaacs

    equipment trailer wiring.

    Agreed. Thats why I like the molded plug/pig tail, less room for error and less chance of corrosion. Then with a junction box you can switch colors till the cows come home:)
  153. nisaacs

    equipment trailer wiring.

    Most vehicle factory plugs are the RV Standard and most trailer wiring is now the same. I have 4 factory trailers and they all work in my trucks. When I do a rewire I follow the 7 way RV style. I just did two horse trailers from scratch. I also run trailer brake wire down each side. Most oem...
  154. nisaacs

    equipment trailer wiring.

    I agree^^^ Get a 7 way molded plug cord and junction box and start from scratch. https://www.etrailer.com/faq-wiring-7-way.aspx
  155. nisaacs

    Replacement Trailer Type & Sizing

    The tag says 4210lbs but that is without options. In general, most manufactures just use a standard weight for a given model without options. D/C, in the last year or so, weigh every trailer that comes out of the factory, so their weight is exact. With the 8k winch, battery, spare, chains...
  156. nisaacs

    JD 4320 spindle failure

    Had a delay, I ordered a wrong seal. Parts book is vague on it and offers two. The one I ordered/received is totally wrong. This one is right so I should get it back together today. Then I can remove and repair the left side. I have been doing tons of research and it appears that the spindle...
  157. nisaacs

    Replacement Trailer Type & Sizing

    I would think you would be fine with this trailer. The shorter it is the less weight will go on the pin. Pretty sure your tractor will not overload the truck loaded all the way forward. The rear attachment will help offset the pin weight. My Loadtrail is similar to the D/C pictured. 22' + 2'...
  158. nisaacs

    Replacement Trailer Type & Sizing

    In theory they might but not for my use. Say If I were rock climbing. I almost always have a gooseneck dump attached so I need the capacity and stability.
  159. nisaacs

    Replacement Trailer Type & Sizing

    I went with the Air Lift 5000.
  160. nisaacs

    Replacement Trailer Type & Sizing

    It is only mandated if the manufacturer rates the 2500 as a class 2. Ford and GM are now over the 10k if you want, on the 250/2500. So far, Ram 2500 max gvw is 10k and why I have a 2500. I agree with your air bag comment, It will do anything a 3500 SRW will do.
  161. nisaacs

    Thoughts on towing this with what we currently have

    I assume a cab/chassis? I was talking pick up trucks, ya know, with a pickup bed. Also, the '97 Ford is apples and oranges with the 2000 model. In '99 Ford introduced an all new truck. However, my '01 Dodge 2500 also has a 5200lbs front axle and a D-80 rear, 11" gear and 4" rear axle tubes...
  162. nisaacs

    Thoughts on towing this with what we currently have

    Not even close. Your '97 Ford used a little bitty Stirling axle. It might have had a 10k gvw, the same as my '21 Ram 2500. My front axle is rated 6k, match that with your Ford. So inboard coils on the Ram 2500 and outboard air bags. Support on both sides of the frame. Shocks both mounted...
  163. nisaacs

    Thoughts on towing this with what we currently have

    In what way? Please explain. Ram has more suspension options than any other pickup truck on the market. They also have the largest rear axle on the market. The 3500 HO dually is massive. 2.5" spindle v/s 2" and 12 bolt axle flange v/s 8 bolt with a larger hub overall.
  164. nisaacs

    Thoughts on towing this with what we currently have

    You haven't said if your truck is gas or diesel. Any of the new trucks with diesel power will get you an exhaust brake, worth their weight in gold for a load that size. Or down size the trailer and keep your truck. Maybe this one? NEW 2023 Bison Ranger 11' SW 3H w/ Slide Out LQ Horse...
  165. nisaacs

    Gooseneck dump spare tire mount

    I can't lift my 120# spare up and down off my gooseneck dump, so I built a curb high, mount. I think it is going to be a life saver.
  166. nisaacs

    Hitch failure on a Diamond C FMAX 212

    This guy has about the same year and model D/C trailer with two failures. He is a welder, fabricator, machinist and trucker. He has video's about it but you have to have a lot of time to watch them, he is old, lol, talks too much and repeats himself, however he is cool as hell. At least he was...
  167. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Going off memory here but I think your trailer is rated 38k gvw. So, 40k square hitch and 3" ball would be standard equipment. Even more so, with a deck on the neck. I have not seen a round hitch go over 30k gvw. However, they do make lighter duty square hitches for lighter duty gvw trailers.
  168. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Nice trailer, and I really like those log bunks.
  169. nisaacs

    JD 4320 spindle failure

    Lost the top spindle bearing on the right side knuckle drive. Not happy with JD parts on this. Super expensive and main axle drive gear not available. Not available from Spicer either. After two days of research, I did find a matched set, used. So, with JD parts and about 4 other vendors, I...
  170. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Armchair quarterbacking, I agree:) If they are too tight, they can distort the tube. I think the recommendation is about 90 lbs tq. However, there seem to be several of these break, from what I am hearing. China steel maybe?
  171. nisaacs

    Hitch failure on a Diamond C FMAX 212

    Hitch failure on a Diamond C FMAX 212, GVW 25.900k I think. I think the hitch is rated 30k, based on their web site. You can see it has been broken for a long time with the wear marks. Crazy it broke in the first place.
  172. nisaacs

    Can yall id this axle from a picture?

    I agree, it is not a 10k, the hub is smaller. Looks a lot like my 8k Lippert axle. My 8k Dexter is a little different. Lippert Dexter
  173. nisaacs

    Can yall id this axle from a picture?

    Looks kinda strange, the bolt pattern looks small. It's hard to read the tire size but I think I can see 17.5 on it. Standard 8 on 6.5 wheel for comparison.
  174. nisaacs

    Found a '97, JD 970 4x4

    This is our monsoon season so the weeds are getting out of control. Using the spike teeth on my cultivator was not working very good so I switched to some duck feet. 2.75" v/s 1.3". Just a quick test, they appear to be going to work a lot better.
  175. nisaacs

    Need quality trailer wiring kit.

    You might consider something like this. Most quality trailers are using the custom wiring harness now. fits 12'-14' channel utility trailers?.this is a modular harness used on Mexico built trailers
  176. nisaacs

    CANOPY brand?

    Different style but fiberglass that you might consider. I have two of them, TAP101 and WD4, shipping is expensive. - KIT: TAP101 Fiberglass Canopy Kit. Fits John Deere Compact WD432-KIT: WD4 FIBERGLASS TRACTOR CANOPY KIT FOR JOHN DEERE
  177. nisaacs

    CANOPY brand?

    Maybe these. Universal Tractor Shade Canopies | Iron Bull Mfg
  178. nisaacs

    Found a '97, JD 970 4x4

    Thats good to know. I went from the JD quick attach to the skid steer on my 4320 so I could use my Bobcat loader attachments. Then I ended up with a new bucket and forks just for the tractor. The Bobcat bucket was a little too big and the forks are kinda worn out and hard to shift the forks. I...
  179. nisaacs

    20' x 20' storage shed recommendations

    Agreed, they get small real quick. We put up a car port 20x24x8 and it was full immediately, before we were completed with it:) We bought just the frame /roof kit and used local material for the sides and one end.
  180. nisaacs

    Found a '97, JD 970 4x4

    Doing some work on a JD970 for a customer. First look appeared to be crack in a hydraulic line but after some clean up, it is a banjo bolt washer, I got lucky. The line is expensive and very labor intensive to change. If you look close, you can see the shinny spot on the bottom of the washer...
  181. nisaacs

    Conveyor floor / tarp for trailer

    With that kind of volume, it sounds like you need a dump trailer. 15 yds of horse manure.
  182. nisaacs

    Is this a good trailer for hauling my tractor?

    Seems like overkill for a 3k lbs tractor. Not much technical info on the web site. Keep in mind, the larger/longer the trailer is, the slower the cycle time. I assume you need the volume/capacity, for other purposes.
  183. nisaacs

    Is this a good trailer for hauling my tractor?

    It is there. Tandem Dual Dump Trailers | U-Dump Trailers, LLC
  184. nisaacs

    8x6.5 wheels - 1/2" vs 9/16" lug holes, clarification

    7k trailer axles use both sizes as do the wheels. They are both stud centric. They will be fine.
  185. nisaacs

    Kaufman 22' tilt deck equipment trailer purchase

    Humm...I would say less for less money. I do agree with your comment on responsible budget. Money don't grow on trees. It is about what is important for you and your use. Assuming the OP is comparing apples to apples on the two trailers. Just in axles alone the price difference is huge. Retail...
  186. nisaacs

    Trailering passenger car

    A lot can depend on the trailer design. Does it have rub rail for unlimited tie down locations, trailer fenders in the way and deck length. I carry several j-hooks and TJR hooks that fit oem vehicle frame holes. I also use a standard ratchet strap and cross tie it over the tires when that can...
  187. nisaacs

    Kaufman 22' tilt deck equipment trailer purchase

    Not saying Kaufman uses these but just an example, they are out there. With your use, it might not even mater to you. Getting the 17.5's is a big plus. For my use, I want the big axles and brakes. 8k Sprung Lippert Hybrid Trailer Axle - 8000 lb Electric Brake 8 lug (12" x 2" Brake - 3" Tube) |...
  188. nisaacs

    Kaufman 22' tilt deck equipment trailer purchase

    Be advised, Kaufman uses some hybrid 8k axles with 3" tube and 2" brakes. You might want to confirm, if in doubt. Standard 8k is 3.5" tube and 3 3/8" brakes. 8k Electric Brake Axles - Kaufman Trailer Parts 12"x2" Electric Brake Assembly - Kaufman Trailer Parts
  189. nisaacs

    Dump trailer, would a jump box help?

    I have/had 5 different dump trailers, no manual valves.
  190. nisaacs

    Log splitter ?

    This might work. https://www.tractorsupply.com/tsc/product/speeco-two-stage-hydraulic-log-splitter-pump-11-gpm
  191. nisaacs

    Dump trailer, would a jump box help?

    Buy a good heavy duty battery, in about a 700-800 cca and keep it charged every night with the onboard trickle charger. You will be fine unless you dump all day. I haul commercial with my dumps so I have two batteries. Never an issue.
  192. nisaacs

    Look what followed me home.

    10k trailers are a good size, and you fixed your trailer brakes all in one shot:D
  193. nisaacs

    New tires and long arm tarp kit for my dump.

    Exactly! I went ahead and fixed my manual jack for you:) (1) 1"x6" pipe nipple and (1) 1"x4" bolt, dang, the bolt at ACE (grade 5) was $11.00. Plus 4 junky Milwaukee saw blades to cut the head off. Thanks for jump starting me, I need it for a motor failure, if nothing else.
  194. nisaacs

    Always carry a valid spare tire and tools to change it.

    40 ton? I carried a 20 ton in my log truck. At about 1 pound per ton of jack capacity, you are looking at a 40 pound jack. Most bottle jacks won't fit under a trailer axle once the tire is flat, too tall. If you carry two, then carry a low profile one and a standard one. I carry a 1.5 ton...
  195. nisaacs

    New tires and long arm tarp kit for my dump.

    Video's of the jacks going up and down, about 40 seconds each and the tarp deployed and returned. The jacks are using a 1200 watt motor, 60:1 gearbox at 68 rpm. Tarp is using a 900 watt motor, 60:1 gearbox at 60 rpm.
  196. nisaacs

    New tires and long arm tarp kit for my dump.

    Yes, I have yet to unhitch with a load. I am thinking of making an adapter to crank handle (I used this one) and I can crank from the other side. I would just need to pull the bolt that goes through the adapter and jack input shaft on the motor side. The adapter is just 1" pipe with a snout to...
  197. nisaacs

    New tires and long arm tarp kit for my dump.

    Installed another tarp motor, jacks this time. Nice not having to struggle to hold the drill and it is twice as fast. It won't lift a load, but for sure, it will work empty. Used the same power panel/switch, just used another cable quick connect.
Top