Search results

Have any of you been able to access the parts catalog at the Kubota Tractor website? It has been absolutely useless for some time now. Joe

I was mowing this morning, stopped for dinner, put it in the barn, then after dinner went out to finish mowing and it wouldn't start. The battery has over 12 volts, the fuses look good, the starter connections are tight, and I played with the treadle, and PTO lever, and checked the seat safety...

With my neck, I can't turn around very far to see behind me. As I get older this is becoming more of a problem. I have a B2650 cab model and would like to mount the monitor from the ceiling, and mount the camera under the back window, or maybe above it. I would also like to have an infared...

How do you guys dispose of your used oil? I was quoted a price of $50.00 to take my oil. They used to take it for free.

I have been having trouble with the safety switches on my treadle and also the seat switch. With the PTO's disengaged it will kill the engine if I go up or down a grade or even shifting my weight on the seat. Then the treadle got off center and that would make starting it a real PITA. It died...

Recently my B2650 has begun to creep forward with my foot off the pedal. Then last week I had a heck of a time to get it to start until I got the pedal centered, and it's getting worse. I checked my owners manual and my WSM, and the only thing I could find was " If the tractor creeps by itself...

I have a B2650 cab model. My 4WD lever is usually extremely hard to get in and out of 4WD. Even on level ground, in neutral, treadle centered, and on cold or hot days. Another thing that exacerbates the problem is the horrible placement of the lever. It's down by the floor, is only a few inches...

Rural King has this welder now for just under $500. Is this a good welder for a beginner? I need it to weld a brace on my back blade made out of 1/8" angle iron. This is a 120V welder. Also is this a decent price? Thanks, Joe

I was mowing yesterday, got down in the ditch by my mailbox and tried going up out of the ditch, and it just spun the tires. Put it in 4WD, and it spun all 4 of them. I grabbed the 3PT lever to raise the mmm, heard a big clunk that shook the tractor. Finally I got out of the ditch and got out to...

I found out the hard way that the lenses in the signal lamps are press fit plastic to plastic. On my B2910 they were held on by 3 screws, not anymore. Apparently several weeks ago I knocked the rear lens out of the left turn signal lamp. Friday when I was mowing I fortunatly saw the lens laying...

I have a 2016 B2650 cab model. Today I noticed this bracket under the dash on the right side of the steering shaft. It has a couple holes in it like it is supposed to hold something. Does anyone know what it is used for?

and a Happy New Year to all of you. Joe

I was doing my 50 hour service (a little late) on my tractor today. I pulled the plugs on the oil pan and while I was waiting for the oil to drain I grabbed the hanging w/strip off the bottom of the hood and took a good look at it. I decided to get out my w/strip adhesive and run a bead of it...

I decided to till the garden today, so I installed my tiller on the back of my tractor, pulled out of the barn, and into the garden. I backed up to the far fence, grabbed the PTO handle to slide it back to Rear PTO, and no matter what I did, the handle would not move. After straining for several...

On my new B2650, I took the front work lights off and replaced them with a pair of LEDs. What an ordeal that was. Then I mounted one of the halogen Kubota lights on the LR corner of the cab where there was an empty plug. Then I found out I needed a new switch for the rear light. So I ordered one...

It's a frame mount apparently. I was wondering if you can raise, lower, and angle the blade hydraulically. The tractor I'm getting does not have a quick attach mounting, and it wouldn't make sense for me to go that route. Thank you, Joe

Hi Guys, it's been a long time since I've been on here. My current 2001 B2910 has almost 1900 hours on it, runs fine and the only problem is a hydraulic leak on one of the curl cylinders. I've been extremely happy with this tractor, even more so after putting on a Sims cab with heater. :)...

Hi guys, it's been a while since I've been on here, but I thought I would let you know about my experience with my Sims cab. To start with, I lost a bunch of weight, so I don't have the insulation I used to have, plus I'm just a few short months away from turning 65. A few years ago we had a...

I'm getting to the point (old age:eek:) that I would like to put a cab on my 2001 Kubota B2910. I've found the Curtis and Sims cabs on the internet, but I wonder if there are any other cabs that would fit my tractor. I would even consider used if it was in very good condition. Did Kubota ever...

I have a Troy Built 4 cycle power unit with a weed trimmer, brush cutter, and a pole saw. It runs great, but while using the pole saw, I managed to break the flexible drive shaft in the pole saw power head shaft. I contacted Troy Built, and they only listed the shaft assy. including the actual...

Hi Guys, I haven't been around much in the last couple of years, and I see a lot of new names now, and that's great. Now to my problem. My pedals don't center very well any more. It seems like it is a little bound up whether I am depressing the forward pedal or the reverse pedal. I have about...

Hi Guys, I just received a letter from Embarq, my local phone carrier, that this new high speed service is now available to our house out in the sticks. I tried to find some info about it on the internet, but I couldn't find very much. I am assuming that it is DSL with a signal booster, since...

Terrorize the UK I just watched the latest episode of American Chopper last night (recorded on TiVo). If you haven't seen it, the Teutel family took their behavior to England and Scotland, and generally scared the bejeebers out of most everyone they came in contact with. On behalf of the...

I've been in awe of the power and deeply saddened by the deaths and destruction due to Katrina in the south. But there was some good that came out of Katrina too. We've been in the grips of a moderate drought this year since Feb. I just emptied my rain gauge, and it had 5.7" of rain in it...

I can\'t log on !!! The other day I tried to log onto TBN, and all I got was the headers and a bunch of horizontal bars instead of the different forums. I have used the "Find" feature to identify and remove all traces of TBN from my computer (including all cookies), re-booted and if I enter the...

Does anyone have any experience with the new Stihl Easy2Start string trimmers? My crappy Ryobi went belly-up over the weekend, and this time I want to get a good trimmer that's easy to start and doesn't make your arms numb from the vibrations. The model I'm looking at is the FS-45. My dealer...

Now I\'m a Grandpa too My daughter had a little girl Tues. 9 lb 7 3/4 oz - 21" long. Grandpa and Grandma are going to see them this weekend. Too bad they're 4 hours away, but it could be worse. Mom, Dad, and baby are doing fine. Virtual cigars for all of you.

My steering wheel is getting progressively more loose (I have both up and down and side to side play) and I would like to tighten the nut or see if there is an upper bearing that can be tightened. I think I know what is causing the problem (lifting my big b*tt up off the seat by grabbing the...

I have a creek behind my house that has several clumps of trees, branches, etc. that are damming up the creek. I need to clean it up as soon as I can. I can get close to some of it with the tractor and I have been able to drag some large trees, and branches up the creek bank, but it is...

Bubba\'s Basic Barn In response to GerardC's request for pictures of my barn, I'm starting this tread instead of hi-jacking Mopower440's. This is a 42x60 pole barn that I had built for me by the company that built our house. They put up the basic structure, poured the floor, did the rough...

I noticed on another thread someone said that their cookies were disabled and they weren't able to reply to a post. I had this problem yesterday and I had to log-in to this site and several others. Some of the sites were not affected. Has anyone else had any problems with losing your cookies...

I'm fortunate to have read your post before the stuff hit the fan. I would like to thank you for a very informative article on a subject that I was unfamiliar with. You put a lot of thought and work into that post, and I would like you to know that I appreciate your effort to educate us.

The mosquitoes have gotten so bad around here that we can't go out after supper without coming back in covered in bites. I was wondering if any of you have or use a mosquito fogger. I am looking for one that will cover about 25 acres or if that's too expensive I could get by with one that will...

In case anyone is interested and didn't see the ads, the Dayton Air Show started today. This year will be the largest one yet. The air show is being held in conjuction with the "Inventing Flight Celebration" in honor of the 100th year since Orville and Wilbur invented the airplane. This year the...

This is why you don\'t drive through water!!! This driver thought he could cross the stream of flood water running across our road. He quickly found out that it was a bad idea. You can see his car submerged right next to the power pole. I finally found him wandering around lost, confused, and...

Muhammad, This past week I've noticed that after about 10 minutes of looking at posts, the site slows way down. Tonight I waited for over 4 minutes just to access this forum so I could advise you of the problem. I read the previous post about the slow index, and did as you suggested marking all...

On June 6, 2001 I bought my B2910 with a MMM and an FEL, since then I have treated it to a box blade, a back blade, a tiller, a landscape rake, a boom pole, a trailer, and a warm barn. In turn it has given me logs for the fireplace, 5 acres of landscaping, 2 driveways, cleared a lot of trees...