Search results

I have made a commitment for a used BL4690B backhoe. Any suggestions as to what thumb to get for it and where. Only need a mechanical one. Vernon

Is anyone getting service from the new Hughes satelite EchoStar 17 launched July 5, 2012? My wireless provider was bought out by Skybeam in Texas and is getting worse by the day. I would like to know if the Hughes service is any better than previously reported. Vernon

I am buying a nice S & W Model 37 from a friend of my son's. I will have it shipped from Washington state to Texas. I haven't done this in 2 decades. Any hints or gotcha's I should watch out for? Vernon

Any body have one of these. I need to get such a saw and the p-c quick blade change intrigues me. Are these any good. I would get the AC version instead of battery. DeWalt 18v are the only battery tools I buy. I am soured on Makita. Vernon

Has anyone used one of these? I did a search but did not get a hit. Vernon

The cylinder on my ATI GK4866 grapple only moves part way. The first time I tried to operate it after no use for about 6 mos it moved part way. I noticed that one pivot pin was missing (another story). It took about a month to get the pin. Put the pin in but still had the same problem with the...

I have chosen to use two canes to get around, much faster, rather than a walker an expect to have to for a while. This is the result of breaking my hip and two bad knees. The result is that it is almost impossible to hand carry things. After many searches I found a 5.11 PUSH (Practical Utility...

I have lost an outside pivot pin and would have to go through a dealer and pay more than 25$ for a replacement. The pin is 1" dia by 2-3/4 long. It has a zerk fitting mounted axially on one end and 1/4" hole across for a lock bolt at the other end. Does anyone know if this is a standard pin...

Today in Houston CL is a flail type sloped bank mower. Looks like it is self contained hydraulics as it has a PTO shaft connection to the tractor. May be a deal for someone Vernon

Ever since we have become concerned about global warming there have been more incidences of snow than I can remember from years past. And I have a lot of years past. I am watching the radar and am seeing snow just over the county line north of me. Just a couple of miles away, hope we get some of...

I have the opportunity to pick up a new BH6000 at a good price. I know that it is intended for smaller tractors but it is a good size for my intended uses. Has anyone used this combination and/or does anyone have any advice on how to setup the installation. I don't have the answer yet but I...

Right now there is a very very large load moving from Houston through Bryan/College Station for a new power plant near Waco TX. The load is 1.7 million lbs, 39ft wide and 300 feet long. It moves 10 miles per DAY. A local TV station KBTX has the story on their web site with comments from their...

Is the flow reduction from elbows generally a concern for other than hydraulic motors? I am thinking about reworking the layout for the lines of my auxiliary circuits and would add elbows for compactness. Vernon

The Orionid Meteor shower is Wednesday morning. Look southeast before dawn. Info here: NASA -The 2009 Orionid Meteor Shower The forecast for us is clouds and rain so I will sleep in. Vernon

I was viewing another forum and spotted this Two recent projects: Boom pole and steel table - The Home Shop Machinist & Machinist's Workshop BBS Thought some TBNers might be interested. Looks very well done. Vernon

I have a 2002 Workhorse 1200 bought used. The engine needs work, leaks oil and has a lot of blow-by. Anyone know of a source of reasonably price engine parts or a rebuilt engine. I might even consider a new engine. Vernon

I was there yesterday to get a couple of standard Pioneer 1/2" NPTF male QD halves. Saw some with 3/4" ORB female threads that were marked that they would couple against residual pressure. I had never seen or heard of this before for this type of QD. If they had had 1/2" NPTF I would have...

My son, granddaughter and I have been having an ongoing arguement about global warming. I contend that they have been brainwashed in support of global warming as I am a skeptic about man-caused global warming (AGW). I have been researching what is really known about "global Warming". I put it...

I am trying to find true rifle loads for my 38-40 Winchester 92. All of the current data that I have found are for pistol only but I know Winchester had some time prior loaded a 180gr bullet to almost 1800fps. What with a flood and a move I cannot find any of my old loading books. All of the...

Here is a photo essay showing a flight cycle of Shuttle Endeavor. It contains some little seen steps in a shuttle flight. Round trip with Endeavour - The Big Picture - Boston.com Enjoy Vernon

I suddenly find myself rooting for oil prices to go up :D:D:D:o I recently sign a mineral lease and what happens depends on the future of oil prices. A new well was recently started a 100 yards or so from the property but we were not included in the unit. That well and another had been...

I have seen a couple of used Kubota BH90s (no tractor) at somewhat reasonable prices. I figure that in the near future there may be more on the market. I would like to get a copy of the installation instructions so I can evaluate what has to be done to install BH's I find on my L3130. Can...

During the mild weather we usually sleep with a window open at the head of the bed. About one a.m. this morning....bark, bark, bark, YOWLLLLLLLLLLLL........bark, bark, bark, YOWLLLLLLL :eek::eek::eek::eek::eek::eek::eek: It almost literally bounces me out of bed: it was LOUD. I got to the...

Our local Lowes has the AM/FM Stereo hearing protectors on sale for just under $40.00. They have digital tuning with presets plus an input jack (includes the patch cord). Just got them tonight so haven't put them to an operational test but thought that I would put the word out. Vernon

Here we go again. This one looks fairly certain for Texas. Now forecasted for Friday afternoon, anywhere from Port Arthur to Corpus Cristi. I think I will get serious about clean up outside. I still have some leftover construction material stacked fairly close to the house that I need to move...

Has anyone seen one in a store? I am thinking that I would like to have one around the house and maybe to carry when out on the tractor. My local dealers say that they can't get one. Vernon

Out of the blue, I received an offer to lease my mineral rights after 20 years of being ignored for my small holding. I am carefully considering this offer and will consult an attorney. This lease contains clauses I have never seen before in my two previous leases so I need to get a good...

I have an EZ-GO Workhorse 1200 that came from a golf driving range. It has the protective cage and a mount for a ball pickup unit on the front. All that is beside the point. I am sure that it was abused by the youngsters that operated it. It fouls plugs badly and oil pressure is low plus leaking...

I let Firefox v3.0.1 update be installed this morning and started having trouble with TBN and other sites. I began getting "Server timed out, try again" messages. I had this problem with earlier version but found that resetting the timeout value to 300 from 30 (secs) solved it. I cannot find a...

I am tired of Vista telling where I can and cannot go on my computer of which I am the sole user. I have obtained an OEM disc of XP Media Center that I plan to install in a dual boot configuration. I am looking for experiences with such a situation. Forewarned is forearmed! I hope! This "access...

An example of natures power. This one has intrigued me for years. NASA - The Tunguska Event--100 Years later Man's work is relatively puny. Vernon

Here is a link to the finest set of photographs of restored WWII war birds. These are the aircraft I grew up watching and been studying these photos. Enjoy Vernon BZ's Chino's Planes of Fame Photo Gallery

Planning ahead for the 400 hour service on my L3130HST. Primary question: is it practical/possible to purchase Kubota's SUDT on-line? Prices & shipping charges? My nearest Kubota dealer is 80 miles round trip and the one I prefer is 180 miles rt so on-line purchase is worth investigating. Of...

I tried some searches but could not home in on the answer although I know I have read it here (TBN). I was given the bow support post from a boat trailer with a winch on it. Galvanized of course. I want to mount it on my new pipe top trailer rigged to lower and lift the tail gate/ramp. Other...

I am looking for a source of surplus IBCs is southeast Texas, particularly Houston. IBC=Intermediate Bulk Container usually in the 200-300 gallon capacity. I want 2 or 3 for water storage to put together a small brush fire extinguisher setup. Any ideas? Vernon

I thought I would pass on the following article with the title I quoted. I get tired of people bashing NASA without understanding what we all gain from it. Space Benefits Please realize that the things mentioned are only part of what NASA has contributed to our lives. Vernon NASA Retired

I am planning on buying one and would like any comments or recommendations about the various brands. I am leaning toward DeWalt simply because I have had good service out of those that I have. I would appreciate any and all comments. Vernon

I just acquired a 6' x 10' single axle trailer for carrying my EZ-GO WorkHorse and hauling about the place. Save me using the longer trailer. Because of my bad knees and back I am looking for ideas on how to gain assistance in lowering and raising the tailgate/ramp. Has anybody used a boat...

I spotted a M4500 beside the road with a for sale sign this afternoon. I could not tell if it was 2 or 4wd. Anybody know anything about these. I had the thought it might be useful for heavy shredding work and save my Grand L. Vernon

The Craigslist for Austin, TX has a listing for used pallet forks. #603766248. I don't need any but maybe somebody here can find what they need. Vernon

As an ex NASA type I frequently get jumped on about the money "wasted by going into space". The following is the best assessment of the true value of government spending on space and other programs. The Space Review: Is space exploration worth the cost? You may think that the space program is...

I have been looking for an old but serviceable pickup. Ran onto a good prospect in the local Graigs list but it has a salvage title. What has to be done to get a full title on a working vehicle? I delayed doing anything beyond talking to the owner while I loaded AutoTap Diagnostic Scanner...

I just ran across this way of repairing failing septic systems Septic system repair that is simple and inexpensive Has anybody encountered this system or know any thing about it? It claims to convert anaerobic systems to aerobic systems. I plan to contact them but will do a lot of research...

I purchased a Caroni TM1900BSC flail mower from Agri-Supply and like it for my mowing needs. Right now I am running it at the highest setting for the high grass and light brush - will set it lower when I have it all knocked down to that level. Now for the reason for this post! I also ordered...

Our son is planning to move out of the San Jose, CA area back to Dallas, TX. He is looking for an economical way to move his stuff. Is there a site like that on YT for tractor hauling but for independent haulers with enclosed trucks looking for loads? Vernon

These are beautiful. Almost worthy of enlarging and framing, Enjoy Photos: Stellar views from the Hubble at 17 | CNET News.com Vernon

Here is the link to an incredible movie of the Solar flare from sunspot 930 on 12/13/06. NASA - A Massive Explosion on the Sun The complete details are at the link story. Vernon

For the second time I popped a front tire bead loose by not realizing it was low and making a hard turn. Lifted the tractor with the FEL but could not get air into the tire, an R4, fast enough to reseat the tire. I called a road service company to take care of the tire. The operated put a...

I have had an Atlas/Craftsman 6" x 18" metal lathe since the mid 70s but have not used it in about the last 10 years. Before that I had used it mainly to turn drivers for bushings, bearings and seals. I have had some potential projects lately so dug the little lathe out but it needs a lot of TLC...

I am planning a couple of additions to this house to add much needed room. Rather than get into replacing the existing unit (A/C & electric heat) and reworking the ducts $$$$$$ I am looking at using mini split heat pump units in the additions. Some of these units are using Freon R410A rather...

I did a search but could not find any thread on this subject. I seem to remember some discussion about this but could not find it. Anyway, very cold (for us) temps are being forecast for next week. My tractor tires are filled with plain water (by dealer) and I am concerned about their...

A collection of 10 weird and beautiful photographs from space. Daily Mail, Mail on Sunday, news, sport, showbiz, health, femail, comment | the Daily Mail These are from the Hubble Space Telescope. I am glad that the new NASA Administrator has decided on another Hubble service mission. Vernon

For the present I have to leave my tractor outside plus I am thinking about buying a backhoe that will be stored outside. Has anyone found a spray-on protective compound for exposed hydraulic cylinder rods that does not require removal before next use of the equipment? I am looking for...

I just had a pleasant shopping experience. Our electric range has been developing more and more small problems so when an oven element burned out and it was going to take two weeks to get a new element at a less than bargin price, we decided that it was time to replace the range. Looked at the...

Has anyone bought/used one of these? I want a tilt link for my Kubota L3130 and CCM can't deliver. This one has me worried as the overall length is almost 1-1/2" shorter than the fixed link length on my L3130, also the 4" stroke seems too short to be really usable. I guess it is intended for the...

I have been given a cell phone repeater for my birthday. The manufacturer calls it a range extender. I am going to need some help in installing so that will wait until the family is here for Thanksgiving. My question: Has any body used one of these and what was your experience? We are in a...

I like the combination of the LA723/L3130 a lot but I find that I over control at times causing violent movements. Plus an extended period of use causes my right shoulder to hurt. That long joy stick handle and your arm extended from the shoulder are poor ergonomics. What does the fender mount...

The shaft guards on my rotary cutter are black with yellow orange bells. I need some of the lock clips for the guards. These are yellow, sort of "L" shaped. Bare-Co number AS1234 is probably it but I cannot buy from them. Does anybody know of a retail dealer. I have seen them in a catalog but...

I just bought a power washer primarily for cleaning the tractor. What detergent do you use with the washer? I am concerned about getting the grease/dirt mix off the FEL. I do plan to thoroughly regrease when I finish. Vernon

I have an EZ-GO Workhorse 1200 that won't start. Need to move it over to the shop to work on it. It looks like I could come in from the side with my pallet forks and just pick it up. I cant see anything underneath that is in the way but thought I would ask the brain trust here if I am missing...

We have been doing a lot of clearing, primarily for fire safety around the house but also along the road to replace a very old barb wire fence. I know for a fact that the fence is more than 75 years old so not much was left. Any way we have cleared back more than 100' from the house leaving only...

Has anyone bought gas from TSC? How do prices compare? My local store has just added them to their stock and in some way I prefer to get my gasses from them. I am currently retooling and am replacing my old regulators, torch and hoses. Vernon

I just bought a PTO driveline slip clutch for my Bush Hog shredder. I am tired of replacing shear bolts. It came without any instructions but I have found most of what I need here on TBN. The distance between the securing bolts on the input and the output is 5" +-. It seems logical to me that...

I need a way to mow less than 1 acre around the house and over a septic field. I am not trying to maintain a lawn and will my L3130 and shredder for the rest of the 20 acres. I may eventaully add a RFM but that will fit this need. Is the JD L125 as good as the Consumer Reports says? I really...

I accidently erased all of the entries in Netscapes password manager. Does anyone know of a way to recover them. Vernon

I posted in Lawn & Garden but did not much response. I made a mistake when I traded in my B6100E (w/RFM) when I bought my L3130. So now I need something for finish mowing around the house. Spotted a used T1760 last week. It looks and runs good, has 346 hours on it, some new rubber. From the...

I have a Kubota L3130 but need something small to mow around the house. Found a used Kubota T1760 today. This one has about 350 hours on it and looks in reasonable shape. My questions: 1. Is it shaft drive or belt? 2. Are mulching blades available? 3. What are the problem areas that should be...

I need the tail wheel frame for a Bush Hog Squealer SQ60R. It can be used, aftermarket or new. Anybody have a good source? Vernon

If you like dogs and the things that you can do with them then Houston in July 21-24 is the place for you. We will be at the Reliant Park World Series of Dog Shows. There will be dogs shown for conformation, obedience, also really fun doing things like agility and flyball. Lots of good...

I would like suggestions toward taking down a full masonery chimney. I am planning to add on to that side of the house and change the uses of the room involved beside the chimney is in bad shape. The chimney is less than 18' tall so that is not a major factor. I cannot find anyone to hire to...

What to do with \'53 Jubilee NAA I have a '53 Jubilee that has just sat for about 5 years. I had originally planned to work it over but know now that is very unlikely. The other two old tractors I had I traded in on my new Kubota. Any body have any thought as to the possible value of this...

I have started looking for a good used UTV. Because of physical problems I like the totally flat floor the EZ0GOs have. Found an 2001 EZ-GO WorkHorse 1200 today with a cab/cage. Story is that it came from a golf driving range and was rigged for picking up golf balls. That means that it was...

Lansdowne-Moody on US290 has a rack (5) canopies of aluminum tread plate at $100 each. These are NOS that fit obselete tractor models so bracketry would have to be modified or fabricated. Sound like a good deal for someone. Vernon

see \"steal line rupture\" in Safety Forum Grand L owners with FELs should read "steal line rupture" in the Safety Forum by TXDon. Have any other owners experienced this failure? texbaylea

I am considering purchasing a landscape rake. I am seeing both on the web. What has been the experience of the experts out there in TBN land? What are your comments about which you think is the "best"? Vernon

I have found that the grapple can be forced open with sufficient force. I attribute this to the expansion of the long run of hoses to the grapple cylinder. I am thinking about using a double piloted check valve at the cylinder to prevent the grapple being forced open. I would appreciate...

E-Z-GO UTV\'s My wife and I are having knee problems so are looking at a UTV to get around our place. The Gators and others like them have no left foot room due to the wheel well. The E-Z-GO UTV's look like they will have more foot room, certainly their golf carts work OK for us. Does anyone...

I have 3 remote hydraulic valves installed on my L3130. Valves 2 and 3 return to center normally. Valve 1 has to be pulled back to center from the push stroke and will stay back on the pull stroke. Could this valve have the float function? I did not order it that way but the dealer knew that I...

I have two additional sets of hydraulic quick disconnects on my FEL for the operation of either the grapple or tree shear when monted on the FEL. They are mounted with the female open end up. I needed to dismount the FEL recently to do the 50 hour service on my Kubota L3130HST. I could not...

Anyone have any experience with the Markham Welding grubber bucket. I have many small stumps and will have more of yaupon and juniper. These are 12" and smaller. I do not have a backhoe and have no plans for one. The grubber bucket looks like it is the tool to do the job of getting these...

Has anyone found a substitute that matches the Kubota gray? While cutting out yaupons yesterday, I wrapped a tangle of barbed wire around the left front tire. Had to use bolt cutters to get it off. No serious damage but some scratches on the paint of the front axle and the side panel. Vernon

My new L3130 has a HD bucket with bolt on cutting edge. The Markham Welding toothbar will not fit because of the bolts. It won't sit down flat on the bucket. Has anyone faced this problem and found a solution. Vernon

After two months of specifying, negotiating, and waiting for all of the pieces to come together, I received my L3130 about 4:30 this afternoon. Then I had to wait another hour and a half while it was unloaded, papers signed and my old tractors loaded. Finally I got about an hour of playing with...

My new L3130 is almost ready. Just waiting for the bolt on cutting edge for the HD bucket. The ATI grapple is installed on the bucket. All the auxillary hydraulics are plumbed in. Got to play with the Hy-Reach Tree Shear on the FEL. I went down to check out a small problem in operating the shear...

Stopped by my dealer today to check on progress in getting my tractor ready. The tractor is there as is the ATI grapple kit. Two of the auxillary valve kits are there with the third on the way. The Hy-Reach tree clipper is due to be shipped this week. Using NASAspeak, the long pole is the...

I just ordered an L 3130 with remotes. In reading the manual I found that there were two types of remote valves, one with a float position. I am wondering when you would use or have need of the float position for something controlled by a remote valve? I have tim to revise my order if desired...

Yesterday I placed my order for a L3130 HST. Before everyone asks, the price breaks down like this: L3130HST-F with R4s $14,425.00 LA723 with Quick Attach, 66" HD Bucket and bolt on edge $ 4,424.00 3 Remote Hydraulic Valves...

I have quotes from two dealers for an L3130 as I want it that are within $300 of each other. Just waiting for them to appraise my two trade-ins. Now my question is how to setup the remote hydraulics. I plan for a Hydraulic top link and for a grapple on the bucket. Is it reasonable to tee from...

I have been looking at Northern's catalog on-line. My back is giving me problems and I don't want to lift 5 gallon cans to fuel my tractor. Northern has several fuel caddies on wheels with hand pumps and capacities of 25-30 gallons, good idea, however their prices seem inordinately high. Up...

Before I place my order for a Kubota L3130 I thought that I should give the competition a good look. Went to the local dealer he did not have a NH but had a Case DX35 hydro which he said was essentially the same. Is this true? I drove the Case DX35 as being a close to the L3130 in terms of FEL...

Just came across a Bobcat ToolCat. It has a 44 hp Kubota engine. Any body know anything about them? Costs? The nearest Bobcat dealer is in Houston, about 100 miles away. They look neat and one would do most of the tasks I plan. Was planning on an L3130 but wanted to be sure.

One last question before I place an order for an L3130. How well does the Kubota Quick attach option for the FELs mate up with the standard skid steer implements?

I am interested in this unit. It looks like it would be the tool for my brush and tree clearing project. Does anyone have any experience with this or know of a good dealer - one that might make a good deal. There are no Texas dealers listed.

I am planning on buying an L3130 or L3430 with FEL depending on the deal I can get. I have never operated with either transmission other than a quick test run. I would appreciate comments/reccommendations. Thanks

Has anyone seen plans for building a tree shear? I had someone to come in with a tree shear mounted on a large skid steer. He is the only one I could find but lives very far away. I caught him at the end of a very large job nearby. He cut down 50-60 large juniper/cedar in about 4 hours with...