Search results

my daughter just purchased a cherokee suv and I wonder what she will get hit with?

I Purchased a 2-14's set of plows for my L3800 and after setting them up I plowed a new garden spot for the fall season. I test plowed a food plot for sil with minor success (more adjusting) and all was ok. For some reason I got the Kubota manual out and it stated the tractor would pull 2-12's...

Anyone know of a good place to find gearbox output shaft and bearing for a 5500 Hesston round baler?

What's up with the prices of twine this year? Mid to upper $50's for bale of sisal. Is it that pricey in other areas? That is 6000 for square bales.

. this is one cell phone pic I snapped of my sil's barn which is 90% complete although this shows one end complete. It's on a poured foundation and built like a house with 16" studs and 12' walls. He put on overhang which really slowed down completion and also the two tone was quite a bit...

I fixed up a temporary sunshield before raking hay and couple years ago and I still use it today. Can be removed it 30 seconds

This is what sil is building. All the standing walls were built and erected Sat. Him and I did some prework and he laid out the plate and built the headers Friday and I cut 76 2x4's to 11' 9''.Him and 5 other mostly carpenters had this all erected by 1:30p and they started at 7am! It's 35x50 on...

The old F250HD(97) with E4OD trans,4X4. Waiting to haul or pull cause it's got a 7.5 and loves gas too much to drive around for no reason.

Took the S185 to get a couple of small ash trees. The tractor had the bale spike on, so I thought I'd try this. It carries more wood that the L3800 bucket but there's no good place for the saw.http://www.tractorbynet.com/forums/images/attach/jpg.gif

I like the engine with part of mower since I did virtually the same thing with rear engine Snapper. It's hard to tell in my pics as well. The engine is sitting on the rear of beam and the running gear is a 49?? chevy rear with closed style driveshaft which doubles as the tongue.

Here's a pic of the S185 that I've had about a month and still learning how to operate. This a a newer bucket that I bought to replace the original because it is almost junk. I got the bobtach working and welded up a couple of cracks on the bobtach bracket. It still has all of that dried...

I've added hydro fluid to the reservoir because I didn't see any oil in the sight glass on the side. After adding about 1.5 gallons I see oil half way up in the glass. Is this full or should I add more?

I am the 2nd owner of a Bobcat S185 and new to skidsteers. With the engine at about 1000rpms the liftarms barely move up with no load and only a bucket on and I am wondering if this is a problem or not. If I increase to 14-1500 they raise faster but not fast enough according to my sil who has...

I bought these of of c list and they too were loose. I think the guy bought the qa adapter and fabbed up the rest to put on forks that were rejected from where he worked. I like many others welded on some shims to take up the slack. Not to hard to do. PS. I put them on the bottom

These forks were on cl and were home made with the purchase of a QA adapter and 42" forks.

I bought a kit for my cutting torch and was wondering if I should be able to get a wire thru the mixer tube from end to end. It has the orifices in the middle also. It's part 6 on the drawing

Hello, first time on this site. I am interested in tractors, chainsaws,firewood cutting, hydro splitting, machinery in general. I live in east-central Mo. and I'm retired(old guy)