Search results

Any one remember the recall on the BH77 main boom and dipper stick pin breaking? I am asking because a friend has a BH77 on a L3800 and broke the pin. I think his serial # is prior to the update. Thanks for any help.

Will the BH77 work on the L3400-L3700 tractors? It is currently on a L3800.

What do you'll think of the Kubota BH77 backhoe? I currently have a Woods BH7500 and am considering selling it since I found a Kubota one for sale. Thanks

For all that recommended the vacuum in the fill hole of the L series tractors I just wanted to say thanks for the tip. Changed the filters and engine oil in my 3700SU and in dads 3800HST this past weekend and may have lost 6 ounces per tractor. The hose nozzle did fit the hole snug.

Any one have any thoughts on a Case IH 1300 sickle mower? Thanks

Any one have any thoughts on a New Holland 450 sickle mower? Thanks for any input.

Any one have any thoughts on either sickle mower? Thanks in advance.

One of my friends bought a 3038E today and was curious if anyone has a backhoe on theirs? Thanks, Sammy

My woods BH7500 has started to leak down (boom cylinder more than others) I am thinking the cylinder is leaking by internally. It digs great just as soon as you turn loose of the handle with in 5 seconds it is on the ground. Thanks for any thoughts.

I have read where several of you'll have the right side fender handle on you L3200 & 3800s does anyone know the part number? Also is there one available for the L3400-3700 series tractors? Thanks

Has anyone operated both 3200 and 3800 and been able to tell the difference in the 5 or so hp? Reason I ask is my father is looking for a 3700 or 3800hst however we found a 3200hst. Any thought on the difference is greatly appreciated thanks.

Does anyone have any pictures of a L series (3400,3700) with a woods 7500 backhoe on a subframe? Thanks

Does any one know of a sub frame kit (WOODS PART #1033674) for sale that will mount a woods 7500 on a L3700SU? Thanks

Fellows I can not find the previous thread. I got lucky today with the 7mm square plug you are suppose to remove from the front axle to allow greasing. As others stated the 7mm open end wrench would slip. Was able to use a 8mm craftsman box end wrench. Tapped it (not beat) on the square plug and...

Does anyone out there have a dump trailer? Thinking about a gooseneck in the 14000lbs range. Maybe 14-16 feet long. Any thoughts or input greatly appreciated. Thanks.

When the specs show 1000lbs @ lift point and 750lbs @ 24 inches behind lift point where is the lift point? Is the lift point the where the implement hooks? Thanks

Does anyone know right off what the max loader psi for the 3400,3700,3800 series tractors is? Bought a gage and quick coupler, going to check it tomorrow. Thanks

Does any one know what the part number is for a subframe that will work on the L3700 or 3400 and attach a woods BH 7500 backhoe? Thanks

Any one know of a used sub frame for a L3700 and a woods BH7500? Thanks

I think I remember someone posting a reinforced or heavy duty toplink for the tphon the L2800-L3700. This would be for use with a backhoe. If I am remembering it bolted in under or near the seat as well as the 6 bolts that hold the standard hitch on. Thanks for any help.

Found a woods BH-7500 for sale. Woundering if anyone has one, if so how they like it. If I wind up with it it would be used with a L3700. Thanks for any thoughts.

Does anyone know where you can find the manuals for a L3700SU on line? Thanks

Has anyone ever put duals on a L2800,L3400 or a L3700? I saw a picture of a smaller Kubota with dual front and rear. I know the manual says not to do this however I figured someone did this anyway.

I have a L3700 with 120hrs. I was looking over everything Saturday and in the reservor tank there was a white cloudy stuff in the bottom, was not mixed with coolant. The coolant is green. I clean the coolant tank and added new antifreeze ran it for about 2 hrs, untill dark. Checked this...

Finally figured out how to join. I found this great site around two years ago when I sold my 8ns and started looking at Kubotas. Has anyone had any dealings with Pats quick change hitches? Thanks for thoughts.