I was able to increase the relief valve pressure a 140 psi, which made a small difference.
On average, the loader and front end are not worked too hard, but there are times when we need maximum performance.
I agree about the front bearings; I always keep a spare set on hand.
The LA723 was an...
The LA513 loader on my L3130 is underpowered for my needs. I found a LA723 loader without the tractor side frame. Will the LA723 work with the existing LA513 frame? If not, is there a newer version of the LA723 that will work with our 3130? Best regards.
Greetings,
My L5030GST w/ 500 hours is making a large squeal (mid tractor) when I engage the PTO with an implement attached. I've tried both a rotary and flail mower. It does not make this sound if nothing is attached.
This began after I rough cutting field (grass and weeds) for 2-3 hours...
I am in the market for a driveway scraper to be used on my private drive, consisting of crushed granite, and am the owner of Kubota L4740 (45 hp at the drawbar). For many years I致e used a box scraper, back blade and landscape rake. I need a time efficient solution for maintaining our 3/4 mile...
After spending hours reading grapple posts these past couple of weeks, I finally pulled the trigger on a new 63" rake grapple and pallet forks from US Attachments after reading EddieWalker's post.
I went with the single grapple that is pinned in four locations. Jeff from US Attachments was...
Greetings,
I'm looking for comments from those of you that use a centered flail mower.
I have used an offset flail (JD 25A) for years but am considering moving to a 72" centered flail. The reason being is we have planted 30,000+ trees and the 8' rows in between must be maintained to prevent...