japody's latest activity

  • japody
    japody posted the thread Spring has sprung in Rural Living.
    Pear tree is over 100 years old. Horses are Tennessee Walkers, full blood sisters.
    • Spring has sprung 3 17 24 1.jpeg
  • japody
    Some people call it landing mat others call it steel grating, but it was an old catwalk at a power plant, I use this thing every year in...
  • japody
    What are you using to drag with?
  • japody
    japody replied to the thread Brown Tree Saw.
    No, just cattle and horses.
  • japody
    japody replied to the thread Brown Tree Saw.
    Yes, there are 12 teeth and they're $28/piece. I don't foresee needing them for a while.
  • japody
    japody replied to the thread Brown Tree Saw.
    Brwon says the cutting edge is good for 200 to 300 hours of cutting time. The edges, which are carbide, can be rotated 3 times, so each...
  • japody
    japody replied to the thread Brown Tree Saw.
    It'll make an 8 inch cut. If the tree is bigger, cut from one side and then cut from the other side. Most of the cedars are 6 to 12...
  • japody
    japody replied to the thread Brown Tree Saw.
    Well, I went ahead and pulled the trigger today. Brown told dealer up to 60-day delivery time. And no, I did not have to pay 100% up...
  • japody
    japody replied to the thread Brown Tree Saw.
    I would be using the New Holland TN 65 which has 47 HP at the PTO. Brown suggests at least 30 HP so I'm good in that regard. I also...
  • japody
    japody replied to the thread Brown Tree Saw.
    Thanks for all the input. The tree saw cuts at ground level, so stumps would not be an issue. The biggest drawback that I have...
  • japody
    japody replied to the thread Brown Tree Saw.
    The field is about 16 acres. I plan to burn the trees once they are piled up. I don't want to bull doze or pull up the trees because...
  • japody
    japody posted the thread Brown Tree Saw in Attachments.
    A nyone have any experience with the Brown Tree Saw. Not to be confused with the tree cutter. I have a field that has been overrun...
    • 1709948321754.png
  • japody
    japody replied to the thread Sidewinder brush cutter.
    The sidewinder with the tire?
  • japody
    japody replied to the thread Everything Attachments poll.
    #1 - 6 ft cutter. Ordered 12/30/22, received 3/27//23.
  • japody
    Is it slipping? Check the tire pressure. It should be about 40 PSI. If it still slips, take out a shim under the wheel hub.
Top