Recent content by Gods Country

My CCY 2400 is approaching 10 years old. It's been a **** good tractor. BUT.....can I still get parts? Wondering if i should consider unloading it. I need a new bucket pin. The dump pin. The bracket cracked somehow. It's reparable, and I currently have it welded, but I was looking for a...

Looks like my tie rod ends are officially whooped. My tractor is a late 80's model. Not precisely sure. The part numbers I am coming with are SBA334800631(LH) & 641(RH). Just want to be sure the part numbers are good for 2120 Ford/NH tractors throughout the production. In the past when I...

I need a block heater for the 2120. I suspect the glow plugs are either weak or non functioning. It starts pretty hard once the mercury drops much below 30. Once I get into spring/ summer I will look further into the issue. In the meantime since the tractor lives outside, and the machine...

May be looking into purchasing a 2120. I have limited information at the moment. The machine is at my in-laws. I used it once a few years ago and seemed to run good. The tractor is a couple hundred miles from me, so it will be a while before I can look at it. What I know is it was originally a...

Anyone have a cross reference for a sc2400 battery? Mine is still fine, but it's going on 6 years, and I would at least like to locate where I can purchase one in case it unexpectedly dies. You know it will happen when it's 10 degrees and a foot of fresh snow.

Pics of the new implement. I did some minor plowing last week. We had 3 or 4 slushy inches. Not a great first time test since the ground was soft, and sloppy under the snow. Steering was difficult due to the muddy slushy garbage under the snow. It does push well, but going to need a bit...

Well I finally broke down and purchased the bxpanded plow. It's all together waiting for snow (falling as I type this :thumbsup:). I hope to keep this thread updated with hopeful useful information, since there seems to be a lack of good information on this plow. I will get some pic up ASAP. I...

See the attached and fill in the blanks. Plus whatever the depth is for the 3d projection.

Re: sc2400 500 hour *UPDATE WITH PICS* So, pretty straight forward procedure. Just like changing the oil. changed the oil at about 533 hours The swirls appeared to be very fine metal particles. It was nothing I could feel, but there was a lot. I've changed differential oil plenty of times...

Anyone replace the gear oil in the front axel? Just ticked over 500 and IIRC that was something on the schedule. Anything to avoid? Tips? Tricks?:D Nothing that needs to be done immediately. But I intend to do it within the next month or two.

So at some point shouln't this forum either get merged into the Yanmar forum or a seperate Yanmar forum be created for the the USA brand (for lack of a better term)Yanmar's? They aren't CC tractors. They never really were, and other than the color they are their own brand....correct? So why...

Judging by these two pics its pretty obvious the difference. I can't say for sure about the locust, but the red oak around here resembles the first pic. These are googled images BTW.

My maintainer died today.:( Seems to be a fried solenoid (if that痴 even what it is) Do I have any hope of getting the old girl running? The wire on the right (from battery) is clearly fried. The left side goes to the starter, and the center wire I suppose is a ground. I have really no info on...

I have decided that I am going to start looking for a used plow for my truck, and use the tractor for cleanup. I currently own a 2002 ram 2500. I haven稚 had any luck finding a used outfit that will fit my truck, so I am hoping instead to find a plow and purchase a mounting frame that will...

No idea how many hours are on the maintainer, but I suspect a few.:laughing: