Recent content by Avondale

My wife\s mobile battle wagon.She won't climb trees

I am seeking any information on a Cockshut 311 side delivery hay rake particularly regarding the replacement of the chain tensioner spring and linkage. In addition, The previous owner told me to remove the chain from the drive sprocket when transporting the rake. The upper axle has a...

I have now found Canadian access to the parts diagram. In fact, I found an old and a new diagram for the second tank so I will need to crawl under the tractor to see which one I have. The piping is similar, looks like the shape of the tank has changed. Hoping to get to the Kubota dealer to ask...

Good Evening, I am seeking a fuel system diagram for an M7950 DT (or similar model). The non-OEM (scanned version) of the service manual does not seem to have one. This machine has a water separator, a priming pump and a fuel filter. I am reluctant to cut away the strapping on the bundles to...

The wife brought the mower back to the shop with a hand full of V-Belt parts from our triple bagger attachment. It has a "fan" that blows the clippings into the bagger. I have a belt part number but can not find the proper length it was before it broke and she drove over it. Husqvarna part...

Good Morning. Anyone have any good ideas about cleaning spilled diesel off gravel driveways? Thanks, Bob

Due to a severe fuel leak, the beast must be towed off the field to the shop. Is there going to be any steering or brakes available on the dead tractor?

Neighbor has a Kubota M7950DT with fuel spraying out of what looks like a gasket on the right hand side of engine, to the rear. There is a shiny box with the word DELPHI embossed and in the upper left, a white gasket can be seen, (it has an un-even edge). Fuel sprays out at this gasket location...

Good Morning, I have a 10 year old Bush Hog SQ600 rotary cutter that has some slop/play at the hub, where it interfaces with the gear box splined output shaft. Is this a normal, fair wear and tear type event for this age and does anyone know how much is too much before replacing the hub? The...

I am looking for info regarding the size tractor required to pull a loaded hay wagon. Is there a general understanding, such as HP per foot of wagon or number of bales, tons of hay, etc? What about braking considerations? Thanks

My old C I/H 574 (circa 1972), has had wiring work done by previous owner(s). I have the wiring dia but do not see the correct cable sizing for the main battery cables, (both +ve and -ve). In fact, my machine has two different size cables. The +ve is 0.549 with insulation and 0.483 on the bare...

I am confused by the sizing/model numbers of the Kubota Excavators. Is there a decoder ring that would guide me to finding the right size of machine for what I want to do. Mainly interested in cleaning up my fence lines around 137 acres, removing some hedge rows, shifting the stumps that might...

Is there any appreciable cutting advantage of one size chain over the other? Let us assume the same saw power head (regardless of brand or engine size), length and using 0.58 gauge as a base.

I have an Arctic Cat ATV that needs a new brake caliper and was wondering how common are these parts between major mfrs? I would think a 6" or 8" disc would use similar parts regardless of the brand, may even all get made at same factory, just re-badged for each ATV Mfr.

Anyone have any good uses for fireplace ash?