flail mower

New to me, definitely NOT new. I have the mower on blocks in the shop. I was concerned about the ugly looking gear oil and not being able to drain it completely due to the drain not being at the low point of the housing. I removed the gear box and have it hanging at an angle that should allow...

Bought a used Alamo74 cutter. One of the features is dual rear laminated, bushhog type trailing height gauge wheels. It’s also has the roller bar. The roller bar has some perforations from rust where it was sitting on the ground. Question, do you really need the roller bar with wheels? Patch...

Looking for help in selecting a trailer type to purchase with the following inputs - Current Tractor Kioti CK27HST with FEL (tires not loaded estimated tractor and FEL weight 3800 pounds) and 65 inch 3 point mount Flail Mower (900 pounds) = total weight 4700 pounds for tractor/FEL/Flail mower...

How do I prevent my mower from stop digging into the ground on turns? Are the skids supposed to be riding on the ground? I have an Ibex Flail TM62Y

Hi everyone, I hope you're all doing well. I'm Dan, and I'm relatively new to the tractor community. I've been loving my Kioti CK3530 tractor for the past few months, but now I'm looking to expand my equipment with a flail mower attachment. However, I must admit, I'm feeling a bit overwhelmed...

Looking for a flail mower. Any recommendations? I've looked at many so far and I'm leaning toward Alamo, just curious to hear from anyone that's worked with flail mowers as it's new to me. I would need it to work with 50hp and 7' cutting width, but open to hear about others that don't fit...

Hi all, new to the forum so bear with me. I'm tired of endlessly searching the internet and forums for answers so I decided to ask right up front. My family is considering a Yanmar 165d tractor in good condition with less than 500 hours on it on an auction. However at the same auction is an old...

I am pretty new to this, so please excuse the noob question. There doesnt seem to be anywhere on the internet that actually tells you how to use farming equipment, and the manuals are next to useless, so no doubt im probably doing something silly. I have a 125cm flail mower, and it just refuses...

I have a new Branson 2515H, and I am trying to decide on a ditch bank flail mower for it. My question is, when I look at a mower they will say "Minimum HP 20" or 25 or 30 etc. My tractor is 25 hp, 20 hp at the PTO. What does that minimum number REALLY mean? Is it a suggestion? The tractor is...

Hey guys, I’m rebuilding a Mott 60 flail mower I picked up for $200. I’ve priced out the parts I need and it’ll run me around $650. The bearings and housings are almost $160 per side. Ive cleaned everything up as best I can. My concern is on the cuttershaft ends. One side looks good but the...

Hey everyone, I’m rebuilding an old Mott flail I got off Craigslist. I just tore everything completely down, took an inventory of what’s broken, and cleaned everything up. I’m working on the cutter shaft now. According to the parts manual I have there are two different shafts, that is, lower...

Hey guys. I've been reading your discussions for months but just joined today. I bought a Massey Ferguson 1526 (25HP) a few weeks ago with a box blade and I'm looking at getting flail mower now. This is my first tractor and I'll be using it around my property and as an addition to my small...

So, one of the tasks I will have with my new piece of land is maintaining utility easements. Technically, I could wait for the utility companies to cut them, but I live there, they don't. 2/3 of my easements are buried gas lines, so they only come out if there is a big problem...almost never...

I have an old Caroni finishing mower that has had its day, contemplating a flail mower- have about 10-11 acres of field to keep the weeds down. Any feedback on flail mowers???