diesel

My mower was surging the last time I used it. Time for new fuel filters so I removed pre-filter(screen) and cartridge filter. Pre-filter screen was plugged up. Cleaned it. The screen is in a metal housing with plastic bowl. It has a drain and two vent plugs in the top. I took all three out prior...

I have, what appears to be, a common issue. However, following all other's previous recommended fixes, I still have my issue. Background: I have a 2004 New Holland TC30. HST. Starts and runs great. I can move the bucket. It will run all day long as long as I don't take off parking brake or take...

Recently the temp gauge has been moving all the way to hot and staying there. Pulled radiator with intent to replace thermostat that might be sticking. Found that there was no thermostat in place. Since had one to ready to replace went ahead and installed it. Ran tractor again with same results...

Anyone know the part number or where to order it. Working in some brush and the oil dipstick is missing. Engine number is KE70461U.

I have a storage tank with a pump and a typical fuel nozzle. However, the hose is really stiff. Is there a good FLEXIBLE 3/4” ?

I've asked this before, but can't find the old thread. I've got a 200 gallon tank. What additives are y'all putting in to keep it clean and fresh? Need something for algae, cleanliness and freshness.

Ram 2500, F250 derated to 10k, gmc 2500 derated to 10k? Bumper towing max non cdl weight. Will be towing often. Just traveled 8 hrs towing in my older ram and move machines multiple times a week.

My L3E had a mouse chew up the air filter and now the compression is low enough it will not start. Time for new pistons and a bore. Where can I find good quality (hopefully OE quality) pistons for an L3E 3 cylinder diesel?

Helping a friend with a Ford 1715 (Shibaura ?) 3 cylinder diesel. While chasing another problem, we dropped the water separator bowl. Of course that put air into the fuel system. We were able to bleed #1 and #2 at the injector, but we can not get #3 to work (clearly NOT injecting as cracking...

Good morning everyone, So I have acquired a Freeman 4000 loader for my tractor but it did not come with any mounting brackets so before I tried to make them horribly I wanted to see if anyone on the forums happened to have some or all the pieces needed tucked in a corner of their garage or...

Have for sale a nice little dozer for 4k Located in southwest Ohio below Dayton Text me at 93777six717fourr

I need some help figuring out an issue with my TC30. It's a 2004 model year with 2486 hours. Hydrostatic drive 4-wheel drive. I was doing some light ripping yesterday, and after finishing, I throttled up to drive back to the shed. The machine started knocking, blew a fair amount of white/grey...

I have a Kubota D1105 engine in a ZD1211 mower. When I tried to start it for the first time this year, the starter made a clicking sound. I knew the battery was going bad as it was getting slow to start last year, so I replaced the battery. However, when I turned the key over, the engine still...

I have a 1965 Ford 3000 diesel tractor. I bought new fuel injectors and noticed that the tops are shorter .the old ones tops are removable and have a spring in them. Did I get the wrong ones?

I'm new at all of this, so I apologize if this has been asked before. I filled my diesel can week before last, filling up at a local gas station. when I looked at the fuel when I got home, I saw that it is red. I thought that red fuel was for off road use only?? I didn't expect to see red fuel...

Fellers. I bought a '74 MF150 about this time last year. 1249 hours. Had the fuel injector pump rebuilt mid-summer, and I rebuilt the starter and installed new key switch early fall. Started using it mid-Winter but the only way I can get it to start is by jumping the battery. Turn the key and...

Regular diesel vs bio diesel, I have used 5% biodiesel in my 2019 F250but only a couple times because I didn’t know it was bio diesel until the second time I was pumping it, I saw on the pump it was 5% bio diesel. Also no long afterwards my chec engine light came on. So a short time later i...

What can I add to older (1980’s) Diesel tractor to add lubricity to the fuel. Have been told that Automobile Transmission Fluid or Two Cycle Oil (used in two cycle engines) can be used but I do not know at what ratio. (How much per gallon of diesel fuel?) Other substitutes?

Starting a new thread for my new mower, a 2021 Kubota ZD1211 60" side discharge mower. It had 95 hours when I bought it. I'll share my experience here amd contrast to other machines I have or have used. My only modification I have planned so far is to add seat isolators. The ones I bought...

Hello. I have a 254 Chinese tractor with 3 cyl. LaiDong engine. The crank case keeps getting filled with diesel fuel somehow. I'm guessing the fuel is getting through from the injector pump maybe? Are there perhaps some kind of seals in the pump that I could change? Or a leaking gasket maybe? If...

Selling this Cub Cadet 1512 diesel garden tractor. Kubota D600 three cylinder diesel engine, hydrostatic transmission, single spool hyd lift, mower deck. Will not come with different bar tires and no wheel weights. Needs fuel lines from tank to engine and return line back to tank. Does run...

I would like to have a new 3/4 heavy duty diesel pickup. My 2011 GMC 2500HD has given me excellent service. I have maintained it well, its running fine now, but since it has over 250k miles I am thinking of getting a new one. Now 13 years old, I feel I need to re-start the clock on a new truck...

I have too many tractors to not be a member of this forum so I decided to join, hoping / praying for some help on a problem I can’t seem to solve on my own. Hopefully in the future I can contribute some too. The glow plugs on my tractor are not working. The power feed wire to the glow plugs...

I have a 1974 international 2400a 3 cyl diesel. Runs good doesn’t seem to smoke more than usual but oil is grey and overfull. Are these known for head gasket or is it something more serious ?

hey guys, im new here. hopefully I came to the right place to find some help. I just bought. used 2011 1600 series 2 with 2600 hours. hours didn't really bother me as the machine didn't look beat up and id only be using it 5-6 hours a week, 6 months out of the year. I used it Monday for the...

So, just bought a summit tractor last week as Atwoods. Has been an amazing addition to my 66 Ford 2000. Today something went haywire though, I was driving and it started sputtering, then died. Now it won’t stay running, and when it does start idling, it won’t rev up. I checked fuel level...

Selling my fully rebuilt Kubota L1500 2WD compact diesel tractor. The L1500 has 8 forward gears and 2 reverse via a high/low range selector. It also has 4 gears for the PTO. The 3 point hitch comes with a draw bar and CAT 1 top link. This little tractor is perfect when coupled with a finish...

Branson 3510i, plastic nipple on the left side fuel tank broke off from the tank. Dunno how it happened...guessing snow/ice chunk might have caught it when I was snow blowing. Anyways, got the tank removed and looking to make a repair. Was thinking I'd drill the hole out, tap it/thread it and...

I am considering buying this transfer tank. It's a Better Built 100 gallon. Does anyone have an experience with this tank, or have any better suggestions for a tank. I use about 300 gallons per year and am tired of toting my 5 gallon cans to the pump. Thanks...

Hi everyone I recently added to my project list a pump rebuild on a 1985 case-ih 485. Project started as someone else's good idea and I'm left trying to get it to back together and running again. I either need a reasonably priced good used injection pump or a parts pump. Does anyone here know...

I feel like a moron that I have to ask this, but I cannot remove the breather/fill cap atop the hood. it just spins, it won’t slide up, it won’t push down (like a bayonet mount), I made a paracordnsling and tried pulling with two hands. . . What am I doing wrong? I really don’t want to have...

I think I know the answer to this, but wanted to see if there is anything else I should check. MF431, Perkins 1103, Delphi pump. Under 300 hours on tractor. Tractor sat, under cover, for several months this summer. Recently went to start it and it wouldn't fire off. Checked the cutoff...

My 2019 M5-111 (tier 4) last month had catastrophic engine failure, 1,200 hours, from the diesel high pressure fuel pump. I only use gas station diesel in 5 gallon containers used only for diesel. Cost estimated $17,000. I wonder how many other Kubotas are having this issue. KTAC, Kubota...

My 1,200 hour Kubota M5-111 engine locked-up while raking hay. Has anyone else had any engine issues with a new (3 year old) Kubota? Of course the warranty expired about 4 months back! Thanks in advance for your input. / Tony, Texas

Just looking to save a buck, just like everybody else. Not that I am working Hoboken-sized fields, more like between a basketball court and a football field with a 1960’s Case 40HP. interested in your thoughts & observations. Thank you!

Hello! New member here, New tractor owner as of three days ago (I am the “new“ - the tractor is older than me), hopefully I will be able to find a lot of answers to questions with (SEARCH) instead of asking questions that have already been asked & answered multiple times... Last night, we went...

Hello, Does anyone here recommend someone or a shop who can re-seal the injector pump on my 1998 Massey Ferguson 231? I’m aware I’d have to ship it. It is dripping diesel where the rotor head goes into the pump housing. There’s an o-ring there. I’d like the whole pump re-sealed since it has to...

I have a lightly used 1982 FORD F-1500 4x4 diesel tractor with the original Ford 770 loader and a late 90’s Woods 750 backhoe with the 15” bucket. The tractor has a manual 4 over 4 transmission, four reverse speeds and 12 forward speeds. You can see the tractor, loader and, backhoe specs at the...

Hey everyone, I have a 1988 Case IH 275 compact tractor with a 3 speed transmission, and a 3 speed range transmission. Everything on it works great, except it will randomly stop moving while going in forward or reverse. After about 2-3 minutes of the tractor running, it will just stop...

HI all, Got a 1969 Ford 3000 diesel. One of the bleeder "bolts" on the fuel filter bracket stripped out the threads on the housing. I can tap this out to a 3/8-24 but do I need a special bolt with holes in it for the bleeder to work ok? For now I am just going to add a 1/2 inch 3/8-24 bolt so...

I recently bought an older B5200. I can get it to crank by jumping the solenoid but that's as far as it goes. Even with a quick shot of starting fluid.(I know, bad for diesels). Any ideas? Also how do you remove the sheet metal holding the instrument cluster? I have removed all of the bolts and...

I have an opportunity to buy an 08 Hustler Z 60in with 1771 hours. What’s the life expectancy on these? What would you consider paying?

Hi TBN friends! I just became the owner of an F3990 Front Mower. In general it works really well. I have been reading the owners manual and it states that you shouldn't run anything more than B5 diesel in it. (5% biodiesel). It gives no reason for the warning and admonition. Given that...

Hey guys. Just wanted to share my channel with you. I work as a Turf Mechanic for many years and I'm still learning everyday but I may have some videos to help some people with certain issues on a variety of machines. I also work on Kubota / Case and New Hollands as well. Please subscribe to the...