Search results

I've run standalone industrial units, residential small units, and tractor PTO units. I presently own a PTO unit. I don't really care as long as it has infeed. The "auto feed" ones... well, not for me. I like my rollers. If you are doing any amount, the jamming and not working of the...

Thank you Willy. It states the tire size as per what I'd found in the manual, unfortunately it then goes on (at the "speed 2" heading) to then say "with 14.9-28 tires". I suspect it would be best to use the 13.6 R28's as per the manuals, not the existing 14.9's...

I have a 4wd L4850 Kubota. Present tires are 14.9 R28 rears and 9.5 R20 fronts. They appear to be factory original, but I don't know for sure. I want to go to turf tires, but those are only available in the 13.6 R28's. Major problems, right? It gets worse. The service manual says 13.6 R28...

I just purchased a 1992 Kubota L4850. It came with calcium damaged rims. I MIGHT be able to weld them up, however I'd prefer to get new ones. It's the two piece rims. I can find the same size outers (12x28) but the new ones are a loop style while the old ones are some sort of double offset...

Yup, whole goods still a thing. Just doesn't help me this time. Thanks all.

Does Kubota still do the "wholegoods" thing? I can't seem to find references newer than about 2022. Yes, I'll be calling tomorrow, but... In Canada we need to be information armed when we are doing purchases. Thanks

Well, I purchased the tractor. Little things need fixed (beyond paint). Minor hydraulic leaks around fittings, the bucket, and the rear tires and rims (that's the biggie). I'll have to try find tires and rims, I guess... I'll be checking with the Kubota dealer on the loader. May as well...

I'm going to look at an L4850DT tomorrow. Anything in particular I should be watching for? It has an LM510 loader. I haven't been able to find anything about this loader. Any comments? Thanks

LOL. I think that needs repaired. I moved a few things around without ejection seat discovery...

I plan on ordering the manuals. I need the machine to get here for the serial number though. It seems there is different manuals depending. Or there were on the site I found, anyway. Planning on the three manual set (parts, service and operators).

This is plan 2. Plan 1 is to have a sniff of what I should NOT be doing. LOL.

Alright. So life changed and I sold my little Kubota. I needed a more hp pto tractor. Got a MF 285 due to be delivered. Here's my problem. First big tractor, and the labeling for all the levers etc. seems to be... absent. The driving controls are fine. It's the pto. 3pt and hydraulic...

Update here. They wanted almost $5k US for used up old axles. I managed to find a differential housing, and am rebuilding the axle. Significantly cheaper, and essentially brand new.

"If the dealer can’t come close to 20% off, join one of many horse associations and get 20% that way. I just priced one that way. Dealer was able to get within $200 bucks without equine program with current incentives. Waiting on inventory to test drive/finalize deal." I didn't know about these...

I'm glad you found that. I wasn't having any luck. Really appreciated.

Thank you!

I blew apart the rear differential housing on my R410 loader. I'm wondering if anybody can recommend anything? I will get it welded if no other options, but I'd like to find a new housing if possible but Kubota Canada is drawing a blank. Wondering if any of you know of a boneyard machine or...

Does anybody know if they have a distributor in Canada? I wanted to order the cyber Monday special, ($149) from the TBN store, and they don't ship to Canada. I looked at a few other places and none of them had a similar price, and none except Pat's shipped to Canada. Shipping to Canada was...

Where would cheapest place to get new hammers for these be? Thanks

So... I need a rear rim. Any advice on prices, aftermarkets, etc? Tire says 12x65 for the size. Thanks

I know it isn't really a tractor, but... does anybody know anything about them? Good? Bad? Ugly? I've seen some have backhoes, some have 3pt hitches. Thanks

What it says... I've been a Kubota owner/user, but have an opportunity for this unit with a backhoe. I know nothing about the tractors, so feedback, please?

I'm thinking about a new machine. We purchased a different property, and it is going to require a lot of work. Some mowing, some excavating, and a lot of contouring. I am thinking of a mid mount mower, 4wd, excavator and loader. I presently have a Kubota B2400 which I love, but which is just...

Have a Kubota B2400 that has served me well, but I'm considering an LS tractor at the moment. I'm thinking the comparable machine should be the 2023. Looking for more loader power, possibly heavier, but not too much larger physically. Can anybody confirm this? I'm hoping to get to a drake...

I managed to break the bottom link on my Kubota B2400. The weld was not complete all the way through, and with another mishap it did not hold up. Kubota here wants over $100 for one. Should I get the Kubota part, or is there a better and/or cheaper one? Thanks

OK. Sitting up sick with what is either a nasty cold, or the flu. I'm up, I'm bored, so the time has come to write up the "transformation" of my little Kubota B2400 into a small woodlot logging machine. This has happened over the course of a few years now, with me humming and hawing as to...

Long story short... a few years ago I took my tractor to a local dealership for a repair I didn't have time for, plus a hydraulics oil change. They were supposed to check for anything out of the ordinary as I was convinced there was something wrong with the hydrostatic drive. It came back as...

I have a Kubota B2400. I am looking for a new filter, but I'm hoping for finer than the Kubota stock filters. Can anybody tell me if they exist, and how to get one if they do? Thanks

Just picked it up today. Looks awesome. Can't wait to try it out... Pics coming.

Just looking for ideas for mounting new hydraulics. Got the main components (not the fittings and hoses yet) and looking to mount it. Not seeing anywhere nice on my kubota b2400. This is for a solenoid and baseplate for the grapple. I'll (later) be adding rear hydraulics but I don't see any...

OK. I'm a little confused by subplates. Subplates don't come with power beyond that I have found, but I've seen references to placing them in power beyond series circuits. Does this mean that in the case of solenoids on a subplate dump to tank or to power beyond doesn't really matter? Thanks

I have an LA351 Kubota loader. I took the valve body off today, with the intention of replacing the o-rings (or whatever). No problem, I figured... pull it off, read the manufacturer name on the casting, and the model number, and get parts... Great... Till... I tried to get a name... I have...

I have a b2400 I've had for years. It is only now that I'm beginning to need to mow with it, and I'm interested in getting a mid mower for it. I'm having issues with dealers (mostly saying it isn't available any more). So... I'm wondering if those with a b2400 mid mower would tell me what...

I have a b2400 with a loader. The spool for the loader is labelled in, out, a,b,c,d and DFP. To me, all self explanatory, except for DFP. There is a line coming out of the DFP position which runs to the rear of the tractor. This line is showing signs of damage, so I'd like to replace it...