Search results

This is how it's done in the wild click here :)

I found this and I read all of 800 plus post and all I can say is, very good project. The guy started with a F-150 and made it a Hummer have fun and make lots of coffee "help please" Ford F150 + Homemade Hummer Body = Ford H150 (Build Thread) - FSB Forums :)

It hangs around the phoenix, Az. area and the owner of the home is curious as to what kind it is. I'm thinking in the conure or a parrotlet family. Thanks Jim :)

Why Deer Hunters Use Guns -------------------------------------------------------------------------------- Actual Letter from someone who writes, and farms. I had this idea that I was going to rope a deer, put it in a stall, feed it up on corn for a couple of weeks, then kill it and eat it...

Always make sure that your load is properly secured. Unsafe Towing video here :)

I saw this on another site and I don't think this is the answer to trailers :D :)

I found this on another site and I would like to share with all of you :)

here is a short video on how it's done, enjoy welding video :)

I'm trying to get one set up and I have always heard that 16" to 18" is a good height to the top of the ball and a little higher is ok. Thanks Jim :)

I have a good friend that works with getting this up in space here is a video of it going up NASA TV enjoy Jim :)

Anyone recommend a good place too get a good one ? I found a XDR ( CAT V )hitch that I like but if there is a better for about same money I'm for it and it has to be 14,000 pounds or better Thanks Jim :)

just do it This way and if you want power windows, try this way :)

Yesterday coming home from the airport I found a short piece of RR track on the side of the road, It is 6'6" long and 5.25" at the base and 5" tall and real heavy, do any of you know what it would weigh per foot or something? Thanks Jim :)

And why either trailer. I have a deck over and I love the space, 212.5 square feet of deck space, My friend Pierre found it when I was looking for a 22' 14 K tilt for around 4 K And I ended up with a 25' D/O Thanks :)

He cut a tree on his property and it fell on my house, and I approached him today about it and he went ballistic big time and denied the whole thing ?? I told him to call the cops on me again, he chose to go to his but kissing friends across the street and tell them all about it? Can this person...

I found this on another site and I thought it may be of some interest here, looks real functional to me Click here Jim :)

It's a 22' bow rider with a 4 CYL. I/O engine with a Mercruiser lower unit and all I have to do is lift it off the trailer, any ideas? I have some 2" straps and I don't think they will support hull properly and I considered the stern hooks and bow ring but I don't think they will lift the whole...

What kind of MPG are you getting empty/loaded and what (if you know rear axle ratio) do you have and what mods/chip/tuner are you using if any. I saw two threads posted by another member that was truly impressive with all the info. Thanks Jim :)

I posted something like this awhile back and it did not go over too big but if you could take a look at this John Deere and this one and the last one here I think these are great! I want one, don't you Jim :)

From about 12:05 AM to about 10 AM this morning. anyone else Jim :)

I know I could use one here Speed Bump :)

I have no idea about doing this but I think I have most of the parts, I want a strong truck to haul my stuff with and I think I found it after looking at the high prices for dually PU's with diesels I decided to go this way. I bought a 2002 Ford F-550, cab and chassis then I looked for a...

Lets see if you can recognize the happy faces. ElfYourself : Brought to you by OfficeMaxｮ It does take some time to load but I'm sure you will enjoy them as they perform for you Jim :)

I have done some research on this engine and I have had good results. Tell me what you can about power, mileage and injectors etc. I have read 15/21 for miles per gallon? sounds high to me Thanks Jim :)

Aviation Humor The strength of the turbulence is directly proportional to the temperature of your coffee.--- Gunter's Second Law of Air Travel The three worst things to hear in the cockpit: The second officer says, "**** it!" The first officer says, "I have an idea!" The captain say, "Hey...

My wife bought me a Tom Tom GPS for our travels with a good discount, full description coming real soon Jim :)

when the parade is over with? none on ebay. Jim :)

For those long winter days and nites, just go and build one of these critters looks like lots of fun Jim :)

I have done searches and I come up blank. Is there such an item out there that I can buy reasonable? and I did go to Burden Sales Surplus Center - Hydraulics, Engines, Electrical and More site with no results. Thanks in advance Jim :)

Really looking for better mileage and a little more power won't hurt. What kind are you using and are you happy and if not what is your next choice Thanks Jim :)

I am not good with a keyboard but if you are and would like to play with a skid steer simulator, have fun with this skidsteer simulator here Jim :)

I purchased a container of Pramitol 25 E and the directions are not clear to me, it says so many gallons per acre ? I need to know how many ounces per gallon of water, I sprayed last Sunday ( pump up sprayer ) at 2 ounces per gallon and it does not show that I did anything, This is expensive and...

Here is a site that will show and tell you whats going up real soon Click here for sneak peak Jim :)

I would like to add a volt and hour meter to my generator, is there an easy way to do this? picture in attachment below Thanks Jim :)

I found this on CL and I think it's weird? what do you think Weird ad ? enjoy Jim :)

Has anyone ever built one? It's an attachment that will LOCK and UNLOCK the levers that hold the attachment on and, yes, I'm getting old and lazy :D Thanks Jim :)

I have a set of THESE on my machine, they are called ( FF 501 & FF 502 ) they are not easy to find and when I do, they ain't cheap, ( local hydraulic shop=$63 & 36 )I went to my local TSC today and I found a set that almost looked like them but after reading Dougsters post about his leaking...

I have a set of FF501 and FF502 and I need 3 more sets, our local hydraulic shop quoted me $63 and $36 for the 2 of them plus tax, that sounds pretty high to me? Jim :)

I have one that I just rebuilt and it is in great condition with a new paint job, edges are sharp and is 18/20 type five rows per section, a total of twenty all together. I will post pictures as soon as I bolt it together Jim :)

My Case will lift a little over nine and a half feet up, my problem is my upstairs deck is ten feet high. I was thinking about making an extension to put my forks further out and up, I need to get more steel and figure some angles and then it will work. My idea is to weld the extension on a skid...

Take this small test and enjoy and remember, it's just a test and I do not think it's real accurate Age test here :)

I have been thinking and I know this would be a nice feature if it won't kill a battery in no time and also would make a great theft deterrent with a hidden key switch ( Shhh ) And without towing vehicle attached :)

This past week end I re-welded some broken welds and did some painting to my Howse 5 foot RC and I think it looks great, now for the braces next weekend

My Case 1845C/skid steer bucket feature will go down before I curl it up, it was not like this and I did pick up a real heavy load, it acts like the fluid is leaking/bypassing somewhere before it goes to curl up mode. I'm thinking a O ring seal somewhere, the machine is a 1991 and I expect some...

This is another easy welding project for your ladder storage, I used scrap EMT tubing ( electricians run wires in it ) can be found at any job site dumpster free or you can purchase in 10 foot lengths. I will have better pictures soon, it will hold 2 extension ladders off floor and inside Have...

As most of you know, I have a link to MY gallery in my signature, It takes you to my pictures in ( Dale T ) gallery ? I just added 2 to my gallery and they went here and only those 2? Thanks Jim

Living in Florida, we have lots of weeds and pulling them out is not easy, I made this simple device to get at the root and just cut and pry them out, see attached images. :) All made from freebie parts like a fence post, bed frame angle and a little welding, have fun making some to make your...

I have a Sony cell phone, model Z520A,, full description here and my problem is every time I up load pictures to MY PICTURES folder, the numbers do not follow each other, lets say I up load 5 pictures today, they go in as ( DSC0001 ) and the next time I upload some they have the same numbers and...

Yesterday our coffee maker quit working, now what ( Proctor Silex ) ? I went out to our camper in our yard and brought the camper coffee maker and made our morning coffee. Today it quits ( Mr Coffee )and we have no more coffee makers, what am I to do without our morning wake upper? :(

I found this on the allmighty internet and I thought some of you would like to see what a cheap bucket is capable of Don't let this happen to you

here are a few videos YouTube - ASV RC-50 vs. Bobcat T-250 YouTube - ASV SR-80 Posi-track vs. Bobcat T-250 YouTube - MICKS BOBCAT TRICK YouTube - BAUMA 2007 - JCB Digger Show YouTube - JCB Dancing Diggers

I found this creature slithering in my garage Saturday and as small as it is, got my attention real good, I'm thinking it's a baby and more around, should I worry about this little guy and his parents? did I mention I am not a snake lover at all, please see pictures and we live in Northeast...

If you buy the single use small container it says 3.2 OZ. per gallon? If you buy the larger size/16 OZ. it says 2.6 OZ. per gallon. There has to be a difference here and they both say 16 OZ. per 6 gallons? How does that figure out :eek:

We live in North East Florida and we hope we are ready with a good generator and fuel and supplies and a strong building Jim

What is the better way without replacing them, they are pretty descent and it has some oil stains on parts of them and I was thinking about using a paint roller with some used motor oil to re coat them and pressure wash the biggest part off after it soaks in pretty good and did I mention...

here are some before and during and after cellphone pictures and now to paint 5 wheels, I will make a lazy susan type of thing so I can paint wheels . Thanks for looking And here is 2 clam chowder can's I welded for the fun of it? I must be bored :D Jim :)

We have seen some very impressive fireworks at Niagara Falls, NY., Disney World, Florida., Washington D.C., and the very best were from our plane watching them come up at us and exploding over the city of Jacksonville, Florida.. Tell us your best :)

At 7:38 PM EST , look for it in your skies tonight and post your pictures! Jim :)

I have a 1991 GMC stepvan with a Cummins 3.9 diesel turbo engine, it weighs 6,500 pounds empty and is 7 foot 9 inches wide and 27 feet long bumper to bumper with 19.5 tires with a dually rear, it has 14 leaf springs over the axle Somebody here knows this answer. Thanks Jim :)

We have been seeing this ( looks like a real bright star) in the same spot in sky for past 3 nites and is 280 degrees to us here in north Florida, does anyone else see it or know what it is? No, this is not a joke :)

One of our friends and member J_J stopped by to visit with Lorraine and Myself and we were in the back of the garage just talking about whatever and he came out with a new game, Garage Hockey. I will let him tell all of you how it's played etc. :)

I am building a hydraulic motorized PTO shaft and I need to know if there is a certain inches from the end of PTO shaft to hook up points and it would be CAT 1 implements Thanks :)

I have a good friend that lives just south of Dallas,Tx. and he has a serious problem with a weed that is called white-brush he tells me it's about 8 to 10 feet tall and covers about 40 feet by 400 feet of his property, are there any of you that have a sure cure for getting rid of this before...

I have lots of metal laying in one big pile and I am making a very simple rack to store it, This is just the ends and will be welded to a rolling 4 X 8 frame so I can move it where ever and both more pictures to follow and as you can tell by second picture, this metal takes up some room...

I just had our tank filled and the gallons was 73.9 and the total including taxes was 247.84 that comes out to $3.35 per gallon.. Is this crazy or what? They have us by the ( you know whats ) :(

That could be used on a tall boom pole ? That would be great. I'm thinking about getting a 12 volt inverter and use an electric el-cheapo saw, like one of the $60 ones Jim:)

I found this one next Jim

take a look at this special till 3/31/07 good deal for $200 the center box is free when ya purchase all 3 Sears.com :)

This is real funny YouTube - American Chopper : The Early Years (Discovery Channel Spoof) Jim:)

And we are the sorry ^&%$#@@ that have to put up with the odor which is RANK,GROSS and SMELLS like POOP and IS POOP Is there such a thing as toilet cops or something like that. ? :mad:

I have a Sony/Erickson cell phone and my question is how do most of you get your pictures in order like DSC00123 and DSC00124 and so on, when I up load my pictures it gives me 3 choices and none of them are to continue the numbers, my choices are OVERWRITE-SKIP-CANCEL ALL,, I have to create a...

I thought it was ? look here looks nice Jim:)

BOBCAT S220 75HP TURBO LIKE NEW This has to be a misprint or a serious scam ?

Florida tornadoes, I've been listening to this all morning, are our Florida members alright? the news aren't saying much except lots of damage Soundguy, are ya ok? Jim:)

I am looking for the better features to incorporate in this. My machine is 75 inches wide, it will be that wide at the root rake part and I had in mind a 3 foot wide for the top grapple, I have gotten some real good ideas from J_J and its a good design, I would like a double joint for the top...

Where is this world going, My wife got a parking ticket on private property, Is this posssible or just a dumb cop? Her tire was on the parking line?? We have the dumbest cops here in jacksonville, Florida :(

Some just love a Deere I got this from one of the motorcycle forums Jim

Well almost, My good friend Pierre call me today and asked if I was Interested in the trailer he found? His description is, 25' deckover, 14K capacity in good looking condition. I called the number and asked about it and we are going in the morning to look and probably buy it.. It should look...

I need one and I looked around my place, I found some wheels "only 3 ?" and some bent fence pipe, I got a silly idea and came up with this, Its real ugly and not the finished product but it will do for a little while http://www.tractorbynet.com/photos/data/551/25735Boom_Pole_Stand_Back-med.JPG...

Most of you have this hanging around, dig out your welder and have at it one used car seat one set of bed rails with wheels one bored afternoon See link for pictures http://www.tractorbynet.com/forums/1024693-post4.html thanks for looking Jim:)

Your not very smart are you. Go away spammer

Re: New product!! Must see!!! WWW.TractorTunes.Com You need to go spam somewhere else NOW!

We purchased some items on a will call and went to pick them up today and I was told it is not in their system? I'm talking almost $1,000 dollars and all I got from the Mcmanager was a 800 number to call? Be careful. I had my papers in order. Very sorry company and Mcmanagers Jim

A member from another forum posted this and I would like to share it with all of you Reveille Thanks I found it to be very touching Jim

The first is a 30 inch wide rake for pulling small weeds and its reversable here it is turned over and a simple trailer mover and the all famous HF quick hitch on a skid steer And I would like to thank Timber and 3RRL for these easy directions. Thanks guys Jim

We all want the best, prettiest and brightest lights around. Take some tips from these people YouTube - christmas lights YouTube - Christmas Lights YouTube - Cool Christmas Lights Jim

I am wanting to purchase a 7 X 12 saw and I have been looking at this one Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies And here is another one Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies It has...

I have a 24' X 24' 2 story garage and I have a neighbor that does not know what a garbage can lid is and his yard at night is a rats nest and they have moved in my garage. I have an alarm with a motion detector and it went off 3 times last night from them running around in there. My eaves are...

My collection is growing fast and I need some sort of rack to store these things. I have a 6 foot disc harrow, a set of forks, a tree/root bucket, a rotary cutter 5 foot, a regular dirt bucket 6 foot and a huge boom pole 11 feet with QA plate. The boom pole is gonna be the hard one? Grr Do any...

pictures and story, the one that got shot with a handgun Thanks Jim

I just recently purchased a Howse model 500 RC ( 5 Foot / 45 HP gearbox )and it came with a grade 5. 1/2" shear bolt, this seems to be a little heavy for this unit. What are you running and on what implement for your safety and is it heavy enough or could it be heavier or lighter? I am running...

I am wanting to get one of these and its like this, do I really need one or do I just want one? Yes I would have use for it someday and Harbor Freight has one on sale now till the end of this month, the twenty-eighth. Jim

I just got some crap and I fwd it to Muhammed I suggest you do the same so he can ban them Jim

I need to know what is wrong with putting a RC/Bush Hog 286 that requires a 40 HP PTO to operate it on a 20 HP PTO HP machine? I understand I will have to go slower and take smaller bites but that is fine with me for now. But will it work? Wife and I cut 4 foot tall grass with a 22 inch push...

I got it twice so far and log in and password thing again.

2\" receiver vise mount Here is something I threw together a few years ago and I would like to share with all of you I am very sorry that the chair is not included Jim

I have looked at allpro trailers and another one on ebay. Do any of you own one of these and how do you like it? I am loving the tilt part for ease of loading and unloading. I welcome all of your opinions and make of trailer. Thanks Jim

This is a crane I made a few years ago for lifting trusses ( 53 feet wide! ) on my walls, 16' up, and was 32' tall and pick up anything, here it is inside lifting my 16" H beams that weigh 900 pounds And here is a picture of my little storage shed and the Warn 8,000 pound winch that does...

I am going to purchase 2, 4' X 8' X 3/8" plate steel for Skidsteer attachments backing plates. I do not want to torch cut or plasma because I do not own either one. I had in mind of a Makita 7 1/4" and a metal cutting blade. I know this will be loud and emit lots of sparks and take some time, I...

Hello This is my first post and I would like to say hello to all of you. I want to build a hydraulics mower/brush cutter that will run from auxiliary hydraulics between 10 and 20 GPM,I have been looking in all the wrong places and after reading lots of postings here, I think I will find my...