TWD's latest activity

If you take the valve out to check for broken gasket\o-ring please take pics as you go and share :) It appears it's not too much...

You will never guess what happenned..... I joined the forum tonight because yesterday digging out a stump on a slight incline where my...

I went out and tried on my m59, and it acts like everyone elses... I can push it back by hand or my wife pulling on it to re-center\go...

Reading through your explanation again, what is happening with yours does sound different from the usual, "power in one swing direction...

If the problem is in an overload relief valve (OLRV), they always come in pairs, so there are two of those relief valves on each control...

Congrats on taking it apart and doing it yourself. And maybe you have solved the mystery. It seems like a piece of O ring holding an...

Did you figure this out and get it resolved? Mine started doing it this year over 800 hours, at first it would just slowly move to the...

I have a similar problem with the swing working to swing right but will not swing left, need to possibly change swing adjustments on the...

When you took off the cover did you check the end of the levers where it connects to the valve in case the portion that slides in and...

I would triple check to make certain that swing valve spool is spring centering properly all the time. Not common occurrence but...

Testing requires disconnecting and applying pressure to certain hydraulic circuits at very high pressures. Not something you want to try...

Sorry, hit the reply a little too soon. When I said rod seal I meant the piston seal at the end of the rod. There are ways to test that...

Typically when the cylinder hits it's limit the pressure relief valve opens up and you can usually hear that and the sound of increased...

I don't know your particular machine very well but I do not believe there are position sensors for the backhoe's hydraulic cylinders. We...

It sounds like a variation on the side-swing malfunction that is a known problem with the M59. Someone good with a search program could...