Jrasband's latest activity

My other unique puller and the extra long rope that I can swap out when needed: Rope Pullers The rope can be as long as needed...

Are the rods bent?

This is how I have been running my M7060, working fine for me so far at almost 400 hours. It does not seem to matter how I run it regens...

I say gravel is a bad idea. It will be really ugly to crawl on later and it will cut the plastic to shreds when you do crawl on it...

You can override the tractor by putting a voltage regulator 0-12V adjustable on the fuel cutoff solenoid across the 2 black wires. This...

I'd like to give some input in case it helps someone else. I have a NH Boomer 55, which is pretty much a LS, and I was experiencing...

Those welds look like something someone would do on their first day of learning how to weld.

I think it doesn't interfere with back dragging, if you don't want to dig in with the teeth just make your tilt less aggressive. If...

When we lived in Alaska we had a type of blueberry. They were wild and the bushes grew 3 to 4 feet high. Harvest them the way the...

No good reason to not have a bucket with teeth it makes everything easier. Forget the bolt on bar just weld them on with a piece of...

There are a few ways you could beef that up through welding. Replace the bent plate with something much thicker, or add another plate in...

Out of curiosity, what's a buffalo turbine?

I have a BX2200 which we have had since about 2002 and it was used when I got it with maybe 200 hours on it. Mine has a FEL on it. The...

limestone gravel gets like that, wish I could get some here.

Now that I have a tooth bucket I see no reason why not to have one for everything, it always makes the job easier.