Recent content by Artisan

Of all things, you would expect a seat belt to work flawlessly. I am beyond livid. Today I laid my BX25 on it's side, a slow plop over and I could NOT get the seat belt buckle to release. I am SO MAD. It simply would not unbuckle. After several minutes I was able to get enough of my bodys...

Yes, Fuse boxes and fuse box terminal ends are built out of unobtainium. Read my details in this thread it explains what I had to do to find terminal ends. (I found a whole fuse panel for sale w/ all the feed wires cut on Ebay and used those parts.) Be sure to take notice of the...

I found something VERY VERY CLOSE, if not it. Looks like a Honda Fury motorcycle might have the same terminals. This picture is in some guys forum album at furyforums.com This looks like what I see so far. Moship I am quit sure I will be able to use one of the pigtails from the fuse box I...

No Bueno moship, What you found has little spikes that stick out that hold the terminal in the fuse block. Here is another picture and explaination as to how the Kubota terminal works.

Here is how to release / remove the terminals. They pull OUT from the back. With lust a LITTLE bit of pull, pulling on the wire from behind use a tiny flathead jewelers type screwdriver and simply push the spring loaded tabs in the appropriate direction and they come out with ease. I the...

OK, I received the donor fuse box I bought on EBAY. The process to remove these lil buggers is simple, a tiny flathead screwdriver will work nicely. More on that later. Right now here is 3 views of the same terminal I pulled out of the donor fuse box. Granted, I could attach wires to these...

moship, That is looking very close my friend. In my first post I have links to 2 large format pictures. When you click on the pic, if you are using Internet Explorer, it will probably size DOWN the picture so once the picture loads, if you click on the picture itself it should blow up to...

Here is a picture of the fuse block I bought that is SIMILAR to what I have on my BX25 davesi708. What is the AZ tool needed to remove the pins from this fuse block and what is the part number for the pins. ?

So I see there are 3 unused holes for mini fuses in my fuse box on my BX25. I want to add circuits utilizing these future holes. Can someone clue me in as to exactly what kind of connector I need to buy (and where*) and once I have it w/ a wire attached, how do I install it, will I simply...

check looks like you are going to get your way... Tonight a received a Warn ProPivot I found on Ebay. It was advertised as an Open Box Special. I think all the parts are here and a few scratches are not going to sway me to return it so we will do the install. Here are the basic parts that...

Amvcane, I am considering something like this, and maybe a small "Stop" at the very bottom, behind the claw tips so they can not be pushed back.

Guys I know there is a lot of incredible talent in the TBN welding section. I perhaps should have posted up what I am doing here but gray matter does what it does sometimes. If any of ya'll want to interject, yea or nea or laugh or praise I invite you to CLICK HERE and give me your opinions.

A couple pics to chew on; and

Well, a new piece of property and some new challenges. SNOW! ...and how to get rid of the stuff! Well, I have another crazy idea and hook or crook I am going to do it. I should have the ability to plow AND use my bucket to move snow when done, meaning w/ the grapple down I plow, with the...

VERY upset I am at the quality of the tires on my BX25. I think I was one of the first to grab one of these jewels about 5 years ago or so now. I looked at the rear tires a couple of days ago and saw significant cracking / crazing just out from the bead about 2" or so. Makes me MAD. On...